Name: Antec BP550
Brand: Antec
SKU: 245956
Rating: 63 (1 reviews)

manualAntec BP550

User’s Manual

Antec Basiq User’s Manual

ATX12V version 2.2 power supply

Model BP550 PLUS

Antec Basiq series power supplies are built to be compatible with the ATX12V version

2.2 specification. They include triple 12V output circuitry that delivers safer and

more reliable output to your system’s components, as well as higher energy

efficiency, which reduces power consumption by up to 25%, saving you money

on your electricity bill. In addition we’ve included a variety of protective circuitry:

OPP (Over Power Protection), OVP (Over Voltage Protection), and SCP (Short

Circuit Protection).

BP550 PLUS includes Universal Input with Active Power Factor Correction (PFC).

Universal Input allows you to connect your Antec Basic power supply to any AC

power outlet between 100~240V without having to worry about setting a voltage

switch. Active PFC improves the power factor value to the power supply by altering

the input current wave shape, helping the power plant provide power to users

more efficiently.

Power Switch:

This power supply comes with a main power switch. Make sure you turn the

switch to the ON ( I ) position before you boot up your computer for the first time.

In normal operation there is no need to turn the switch to the OFF (O) position

since the power supply is equipped with a soft on/off feature which turns your

computer on and off through the soft switch on your computer case. You may

need to turn the switch to the OFF position occasionally should your computer

crash and you cannot shut it down through use of the soft switch.

Installation:

1. Turn off the hard power switch on your old power supply if any.

2. Open your computer case. Follow the directions provided in your case manual.

3. Disconnect all power connectors from the motherboard and from the peripheral

devices such as case fans, hard drives, optical drives, floppy drives, etc.

4. Disconnect the power cord from your old power supply.

5. Remove the existing power supply from your computer case and replace it

with your new Antec power supply. (Illustration 1)

View the manual for the Antec BP550 here, for free. This manual comes under the category Computer adapters and has been rated by 1 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the Antec BP550 or do you need help? Ask your question here

Need help?

Do you have a question about the Antec and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Antec owners to provide you with a good answer.

Number of questions: 0

General

	Antec
	BP550 \| 0-761345-06550-4
	Computer adapter
	English
	User manual (PDF)

Power

Total power	550 W
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power Factor Correction (PFC) type	Active
Efficiency	82 %
Power protection features	Over current, Over power, Over voltage, Short circuit

Performance

Power supply unit (PSU) form factor	ATX
Purpose	PC
ATX version	2.2
Noise level	- dB
Mean time between failures (MTBF)	100000 h
80 PLUS certification	80 PLUS

Design

Product colour	Silver
Fan diameter	120 mm
Number of fans	1 fan(s)

Ports & interfaces

Motherboard power connector	20+4 pin ATX
Number of SATA power connectors	3
Peripheral (Molex) power connectors (4-pin)	3
PCI Express power connectors (6-pin)	1
CPU power connector (4+4 pin)	✓
Floppy drive power connector	1