AMT SS-11 manual

7.5 · 1
PDF manual
 · 4 pages
manualAMT SS-11
1 1


Guitar preamplifier

User’s manual
Safety precautions.
CAUTION! High voltage! Danger! Even after the device has been switched
off the internal circuits might be alive with up to 500V
voltage. To avoid the electric shock DO NOT REMOVE
the bottom or top covers. The device does not contain
any user-serviceable parts. The preamp can be
repaired only by qualified personnel. Please disconnect
the device from mains if not in use.
WARNING! To avoid fire or electric shock do not let rain or water inside the device.
Do not place any liquid containing vessels on top of the device.
The icon means the presence of live and dangerous voltage
inside the device and the danger of electric shock.
This icon points out important information related to the
device operation and maintenance contained in enclosed
Please read the instruction manual carefully.
1. Keep the manual at hand.
2. Pay attention to warnings.
3. Follow all operational instructions.
4. Use only dry cloth for device cleaning. Do not forget to switch
the device off.
5. Please do not block ventilation slots. When connecting the
device follow the instructions provided by the manufacturer.
6. Please do not place the device nearby heat sources, avoid
direct sunlight.
7. Do not step on the mains cable, avoid sharp angles etc. If the
mains plug or plug adapter of the device are used for
disconnection from mains, they are to be easily accessible.
8. Use only auxiliary devices and accessories recommended by
the manufacturer. Disconnect the device during thunderstorms
or when the device is not used for a long time.
9. Any work related to the device repair must be done by
qualified service personnel.
10. WARNING! All instructions related to the device servicing are
intended exclusively for qualified personnel. To avoid the
electric shock DO NOT fulfill repair works not described in the
instruction manual. All repairs must be done by qualified
Important 1
Complete set 1
Introduction 2
Before you start 2
Specifications 2
Controls 3
Front panel 3
Only for qualified personnel 3
Tubes replacement 3
Connections 3
Block diagram 4
If the device was transported or stored in cold environment it is necessary to
leave the device in its original packaging for at LEAST 2 hours before switching
it on!
Use only the cables specified for corresponding connections of the guitar
preamp to other devices.
Please, do not use other types of cables: e.g. speaker cables etc.
Please switch the device on only after you have completed all audio
Before switching the preamp on make sure that the housing, the connection
cables and the power adapter mains plug are free from damages: cuts, cracks,
dents etc. and are intact.
To switch SS-11 first insert the power adapter low voltage jack into the
corresponding socket on the rear panel of the guitar preamp and then plug the
adapter into the wall outlet.
To switch the guitar preamp off first turn off the guitar amplifier used with
SS-11. Then disconnect the power adapter of the guitar preamp SS-11.
The complete set includes:
1. Guitar preamp 1
2. Power adapter 1
3. Instruction manual 1
4. Packaging 1
5. Warranty card 1

View the manual for the AMT SS-11 here, for free. This manual comes under the category Guitar Amplifiers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the AMT SS-11 or do you need help? Ask your question here

Need help?

Do you have a question about the AMT and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other AMT owners to provide you with a good answer.

Number of questions: 0

Guitar Amplifier
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the AMT SS-11 below.

Is your question not listed? Ask your question here

No results