Amana ABB2224BRM manual

Amana ABB2224BRM
6.3 · 1
PDF manual
 · 48 pages
English
manualAmana ABB2224BRM
6

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

WARNING

Excessive Weight Hazard
Use two or more people to move and install or uninstall
appliance.
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from surfaces before turning on
the refrigerator. Rub a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see “Refrigerator Safety.”
Dispose of/recycle all packaging materials.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for
cleaning or service, be sure to cover the floor with cardboard or
hardboard to avoid floor damage. Always pull the refrigerator
straight out when moving it. Do not wiggle or “walk” the
refrigerator when trying to move it, as floor damage could occur.
Clean Before Using
After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions in
the “Maintenance and Care” section of your Owner’s Manual.
Important information to know about glass shelves and
covers:
Do not clean glass shelves or covers with warm water when they
are cold. Shelves and covers may break if exposed to sudden
temperature changes or impact, such as bumping. Tempered
glass is designed to shatter into many small, pebble-size pieces.
This is normal. Glass shelves and covers are heavy. Use both
hands when removing them to avoid dropping.

Electrical Requirements

WARNING

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical connection.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person.
Do not use a cord that shows cracks or abrasion damage along its
length or at either the plug or connector end.
Recommended Grounding Method
A 115 V, 60 Hz, AC-only 15 A or 20 A fused, grounded electrical
supply is required. It is recommended that a separate circuit
serving only your refrigerator and approved accessories be
provided. Use an outlet that cannot be turned off by a switch. Do
not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the refrigerator to OFF. Depending on
your model, turn the refrigerator control to the word OFF, or press
the refrigerator down arrow touch pad until a dash (–) appears in
refrigerator displays as shown. Disconnect the refrigerator from
the electrical source. When you are finished, reconnect the
refrigerator to the electrical source and reset the temperature
controls to the desired setting. See “Quick Start Guide.”

Location Requirements

WARNING

Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from appliance.
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: This refrigerator is designed for indoor, household
use only.
This appliance is intended to be used in a household and similar
applications such as:
Staff kitchen areas in shops, offices and other working
environments.
Farm houses and by clients in hotels, motels and other
residential type environments.
Bed and breakfast type environments.
Catering and similar non-retail applications.
To ensure proper ventilation for your refrigerator, allow for 1/2"
(1.25 cm) of space on each side and at the top. Allow for
1" (2.54 cm) of space behind the refrigerator. If your refrigerator
has an ice maker, allow extra space at the back for the water line
connections. When installing your refrigerator next to a fixed wall,
leave 2
1
/
2
" (6.3 cm) minimum on the hinge side (some models
require more) to allow for the door to swing open.

Manual

View the manual for the Amana ABB2224BRM here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the Amana ABB2224BRM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Amana and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Amana ABB2224BRM specifications

Below you will find the product specifications and the manual specifications of the Amana ABB2224BRM.

General
BrandAmana
ModelABB2224BRM
Productrefrigerator
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Quickstart Guide (PDF), Energy label (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Amana ABB2224BRM below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How can I ensure that the Amana ABB2224BRM refrigerator effectively reduces contaminants in the water?

To ensure that the Amana ABB2224BRM refrigerator effectively reduces contaminants in the water, follow these steps: 1. Use the recommended replacement element model numbers such as EDRARXD1, WHRARXD1, or KADARXD1, as specified in the manual. 2. Replace the disposable cartridge at least every 6 months to maintain optimal filtration performance. 3. Monitor the water filter system to track the amount of water passing through and receive alerts for timely filter replacement. 4. After changing the water filter, flush the water system to ensure proper functioning. 5. Install the water system in compliance with state and local regulations for safe and effective operation. 6. Note that the filtration system is designed for cold water use only to maximize contaminant reduction efficiency.

What should I do if the reduction of a specific contaminant in the refrigerator's water is below the specified average percentage?

If the reduction of a specific contaminant in the Amana ABB2224BRM refrigerator's water is below the specified average percentage, you should take the following steps: 1. Check the influent challenge concentration of the contaminant in the water. 2. Ensure that the product water concentration meets the maximum permissible limit. 3. Verify the average percentage reduction achieved by the refrigerator's water filtration system. 4. Compare the achieved reduction percentage with the minimum required reduction percentage. 5. If the reduction percentage is below the specified average, consider replacing the water filtration system element with a new one. 6. Re-test the water after replacing the filtration element to ensure the contaminant reduction meets the required standards.

Is the manual of the Amana ABB2224BRM available in English?

Yes, the manual of the Amana ABB2224BRM is available in English .

Is your question not listed? Ask your question here

No results