Amana ABB2224BRM manual

Amana ABB2224BRM
6.3 · 1
PDF manual
 · 48 pages
English
manualAmana ABB2224BRM
5
1. Using a sturdy container, depress and hold the water
dispenser paddle for 5 seconds.
2. Release the dispenser paddle for 5 seconds. Repeat steps 1
and 2 until water begins to flow.
3. Once water begins to flow, continue depressing and releasing
the dispenser pad (5 seconds on, 5 seconds off) until a total of
1 gallon (3.8 L) has been dispensed.
Replacing the Water Filter
To purchase a replacement water filter, use model number Filter
A, contact your dealer, or call 1-800-422-9991 in the U.S.A. or
1-800-807-6777 in Canada.
Replacement filter part number and filter model names can be
found on Performance Data Sheet page.
IMPORTANT: Air trapped in the water system may cause water
and filter to eject. Always dispense water for at least 2 minutes
before removing the filter or blue bypass cap.
1. If applicable, press upward on the water filter cover to access
the filter.
2. Turn filter counterclockwise, and pull straight out to remove.
NOTE: There may be some water in the filter. Some spilling
may occur. Use a towel to wipe up any spills.
3. Remove sealing label from replacement filter and insert the
filter end into the filter head.
4. Turn the filter clockwise until it stops. Snap the filter cover
closed.
5. Flush the water system. See “Flush the Water System” for
details.
NOTE: The dispenser feature may be used without a water filter
installed. Your water will not be filtered. If this option is chosen,
replace the filter with the blue bypass cap.

Reset Water Filter Status

After replacing the water filter, press and hold Reset Filter or Filter
Reset (depending on your model) for 3 seconds. The Order and
Replace indicator lights will blink and then go off when the system
is reset. On some models the indicator light will change to blue
when the system is reset. See the “Quick Start Guide” for more
information.
On models with Options and Measured Fill buttons located
on the control panel:
After changing the water filter, reset the status light. Press the
Options button to enter Options mode, then press Lock to initiate
the reset, then press Measured Fill to confirm that you want to
reset the status light. When the system is reset, the “Order” and
“Replace” icons will disappear from the display screen.
On models with Water Filter button located on the control
panel:
After changing the water filter, reset the status. Press and hold the
Water Filter button for 3 seconds. When the system is reset, the
water filter icon will return to Blue and the words “Replace Filter”
will disappear from the display.

Vacation and Moving Care

Vacations

If You Choose to Leave the Refrigerator On While You’re
Away:
1. Use up any perishables and freezer other items.
2. If your refrigerator has an automatic ice maker, and is
connected to the household water supply, turn off the water
supply to the refrigerator. Property damage can occur if the
water supply is not turned off.
3. If you have an automatic ice maker, turn off the ice maker.
NOTE: Raise the wire shutoff arm to Off (arm up) position.
4. Empty the ice bin.
If You Choose to Turn Off the Refrigerator Before You Leave:
1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic ice maker:
Turn off the water supply to the ice maker at least one day
ahead of time.
When the last load of ice drops, raise the wire shutoff arm
to the Off (up) position.
3. Empty the ice bin.
4. Turn off the Temperature control(s). See “Using the Controls”
in the Quick Start Guide.
5. Clean refrigerator, wipe it, and dry well.
6. Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odor and
mold from building up.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1. If your refrigerator has an automatic ice maker:
Turn off the water supply to the ice maker at least one day
ahead of time.
Disconnect the water line from the back of the refrigerator.
When the last load of ice drops, raise the wire shutoff arm
to the Off (up) position.
2. Remove all food from the refrigerator and pack all frozen food
in dry ice.
3. Empty the ice bin.
4. Turn off the Temperature control(s). See “Using the Controls”
in the Quick Start Guide.
5. Unplug refrigerator.
6. Clean, wipe, and dry thoroughly.
7. Take out all removable parts, wrap them well, and tape them
together so they don’t shift and rattle during the move.
8. Depending on the model, raise the front of the refrigerator so it
rolls more easily or raise the leveling screws so they don’t
scrape the floor. See online “Adjust the Door(s)” or “Door
Closing and Door Alignment.”
9. Tape the doors closed and tape the power cord to the back of
the refrigerator.
When you get to your new home, put everything back and refer to
“Installation Instructions” for preparation instructions. If your
refrigerator has an automatic ice maker, remember to reconnect
the water supply to the refrigerator.

Manual

View the manual for the Amana ABB2224BRM here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the Amana ABB2224BRM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Amana and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Amana ABB2224BRM specifications

Below you will find the product specifications and the manual specifications of the Amana ABB2224BRM.

General
BrandAmana
ModelABB2224BRM
Productrefrigerator
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Quickstart Guide (PDF), Energy label (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Amana ABB2224BRM below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How can I ensure that the Amana ABB2224BRM refrigerator effectively reduces contaminants in the water?

To ensure that the Amana ABB2224BRM refrigerator effectively reduces contaminants in the water, follow these steps: 1. Use the recommended replacement element model numbers such as EDRARXD1, WHRARXD1, or KADARXD1, as specified in the manual. 2. Replace the disposable cartridge at least every 6 months to maintain optimal filtration performance. 3. Monitor the water filter system to track the amount of water passing through and receive alerts for timely filter replacement. 4. After changing the water filter, flush the water system to ensure proper functioning. 5. Install the water system in compliance with state and local regulations for safe and effective operation. 6. Note that the filtration system is designed for cold water use only to maximize contaminant reduction efficiency.

What should I do if the reduction of a specific contaminant in the refrigerator's water is below the specified average percentage?

If the reduction of a specific contaminant in the Amana ABB2224BRM refrigerator's water is below the specified average percentage, you should take the following steps: 1. Check the influent challenge concentration of the contaminant in the water. 2. Ensure that the product water concentration meets the maximum permissible limit. 3. Verify the average percentage reduction achieved by the refrigerator's water filtration system. 4. Compare the achieved reduction percentage with the minimum required reduction percentage. 5. If the reduction percentage is below the specified average, consider replacing the water filtration system element with a new one. 6. Re-test the water after replacing the filtration element to ensure the contaminant reduction meets the required standards.

Is the manual of the Amana ABB2224BRM available in English?

Yes, the manual of the Amana ABB2224BRM is available in English .

Is your question not listed? Ask your question here

No results