The power status LEDs will light up according to available power capacity
Charging Your Device
Use the original cable that came with your device. Connect the USB-A end to one of
the USB Output ports on the battery pack. Charging will start automatically once the
cable is connected.
LED Indicators
USB Output Port A
5V / 2.1A*
Micro USB Input
DC 5V / 2A
Solar Panels
32 LED Lights
Power Button
Operating The LED Lamp
- To turn ON, press the Power Button once for 100% brightness
- Once ON at 100%, press the Power Button once for 25% brightness
- Once ON at 25%, press the Power Button once for strobe light
- Press the power button once to turn the lamp OFF
Note:The LED lamp will last up to 50 hours with 25% brightness when the battery
charger is fully charged.
Carabiner
*Max output 5V / 2.1A combined
Note: LED indicators will remain on and stop flashing when the power bank is fully charged.
When the battery is low, the first indicator will start to flash. Please charge the power bank.
The power bank will shut off in 30 seconds when no device is connected.
View the manual for the Aluratek APBQ08F here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Aluratek APBQ08F or do you need help? Ask your question here
Need help?
Do you have a question about the Aluratek and is the answer not in the manual?
Need help?
Do you have a question about the Aluratek and is the answer not in the manual?
Question and answer
Number of questions: 0