- Use the included USB cable to charge the battery pack
- Connect the Micro USB tip to the Micro USB port on the battery
- Connect the USB Type A tip to a USB port on your computer or laptop. Use of an
AC - USB Adapter is also acceptable (5V 500mA / 1000mA)
- The power status LEDs will light up according to charging capacity
Charging your digital device
- Use the original cable that came with your device or a cable with suitable connector
- Connect the USB tip to one of the USB Output ports on the battery pack
- Press the ON / OFF button to start charging the device
Empty<30% capacity
For more information, please visit: http://aluratek.com/warranty-return-policy
You can register your product online at: http://aluratek.com/product-registration
E-mail: support@aluratek.com
Web: www.aluratek.com/support
Local (Tustin, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship for
1 Year from the date of purchase.
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
*Original charging cable required
Charge up to two devices at
the same time*
Charge your battery
with the included
Micro USB cable
On - Off button with
power level indicators
30 - 80% capacity>80% capacity
Tech Support & Warranty Information
View the manual for the Aluratek APB04F here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 10. This manual is available in the following languages: English. Do you have a question about the Aluratek APB04F or do you need help? Ask your question here
Need help?
Do you have a question about the Aluratek and is the answer not in the manual?
Need help?
Do you have a question about the Aluratek and is the answer not in the manual?
Question and answer
Number of questions: 0