Alto Live-Drive manual

Alto Live-Drive
5.7 · 1
PDF manual
 · 27 pages
English
manualAlto Live-Drive
23
Tap the Hardware
Password Enable
button to set a password to "lock out" other iOS
devices from controlling that loudspeaker or
subwoofer. If you need to use another iOS
device to control it, you will need to enter the
password on that iOS device. (Your iOS device
will remember the passwords of all previously
connected loudspeakers or subwoofers. When
reconnecting Live Drive to a loudspeaker or
subwoofer whose password you have already
entered, you will not need to re-enter the
password.) Tap the Hardware Password
Enable button again to disable it, or tap the
Change Password button to set a new
password.
Tap the Internal Noise
Test Enable button to
select a sound to send repeatedly to
the loudspeaker or subwoofer for
testing. Tap Sine Wave or Pink Noise
to send the corresponding sound, and
tap and drag the fader to adjust the sound level.
Note: Sine Wave will generate a swept sine
wave from 20 Hz to 20 kHz. This test is useful
for ensuring the loudspeaker's or subwoofer's
transducers and amplifier are operating
correctly.
Note: To play the internal noise test sound, the
loudspeaker or subwoofer must be unmuted.

Manual

View the manual for the Alto Live-Drive here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Alto Live-Drive or do you need help? Ask your question here

Need help?

Do you have a question about the Alto and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Alto Live-Drive specifications

Below you will find the product specifications and the manual specifications of the Alto Live-Drive.

General
BrandAlto
ModelLive-Drive
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Alto Live-Drive below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Alto Live-Drive available in English?

Yes, the manual of the Alto Live-Drive is available in English .

Is your question not listed? Ask your question here

No results