Alto Live-Drive manual

Alto Live-Drive
5.7 · 1
PDF manual
 · 27 pages
English
manualAlto Live-Drive
10
Tap the chain-link icon to "link" the
levels of all connected loudspeakers
and subwoofers together. Their faders will
"snap" to match the level of the lowest one. You
can then tap and drag one fader to adjust
both/all of them simultaneously.
Important: Enabling this link feature resets all
loudspeakers' and subwoofers' DSP Modes (on
the DSP Page) to Flat and resets all Low, Mid,
and High faders (on the EQ Page) to 0 dB. Any
further adjustments to those settings for a
loudspeaker will be made for all other
connected Black Series loudspeakers. The
same goes for subwoofers.
If your connected Black Series loudspeakers or
subwoofers are in different mute states (e.g.,
two are muted while one is not), enabling the
link feature will not affect this. However, if all of
them are already in the same mute state, or if
you mute or unmute all of them, then their Mute
buttons will be linked until you disable the link
feature.
This link feature will not affect anything on the
Advanced Page or any polarity or password
settings.
The Peak indicator will light up
when the signal output level
reaches its maximum playback level. If this
indicator is lit continuously and if the
loudspeaker's or subwoofer's output sounds

Manual

View the manual for the Alto Live-Drive here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Alto Live-Drive or do you need help? Ask your question here

Need help?

Do you have a question about the Alto and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Alto Live-Drive specifications

Below you will find the product specifications and the manual specifications of the Alto Live-Drive.

General
BrandAlto
ModelLive-Drive
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Alto Live-Drive below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Alto Live-Drive available in English?

Yes, the manual of the Alto Live-Drive is available in English .

Is your question not listed? Ask your question here

No results