Do you have a question about the Alto Pro TS SUB 15 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Alto Pro TS SUB 15 owners to properly answer your question.
Hi just wondering if there is a 20mm thread in the top pole mounting hole or is it just straight 35mm ? Reason being I want to buy a distance pole and some have a 20mm thead and some don't. Regards, Pat Madigan.
Don't fully understand the link outs . Can you link out to a amplifier to run passive alto subs? As well if you can does these links out affected by bypass button? I know the left/mono and right outputs are controlled by bypass for running tops. Thanks
ola ,sera que alguem tem o esquema eletrico da caixa ts sub 15
Hello - when using the outputs to plug into speakers, I'm confused. It says my other speakers can be passive or active - so it will power passive speakers and not power active speakers? How does it figure that? I'm just wondering if I still need an amplifier for my passive smaller full range speakers or not. Thx!
I have a mixer with only phono out connections, i have an XLR to phono cable which i use to connect the mixer to the sub. I connect out to my top speakers from the sub but do not get any sound from them and very little from the sub, only a very muffled sound. My question is could the XLR to phono cable be the reason i'm not getting any sound, or could it be something else. Any help would be appreciated. Tony
View the manual for the Alto Pro TS SUB 15 here, for free. This manual comes under the category Speakers and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English, French, Spanish, Italian, German, Dutch. Do you have a question about the Alto Pro TS SUB 15 or do you need help? Ask your question here
Below, you will find the most frequently asked questions about the Alto Pro TS SUB 15.
Is your question not listed? Ask your question here
I have an Alto pro ts sub 15 . my question is. What is the function of the bypass switch on the back of the sub ? What does it do actually ? I would like the answer in full detail please . Thank you Gary