Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
Chapter 5: Installing the Chassis in an Equipment Rack
96 Section II: Installing the Chassis

Adjusting the Equipment Rack Brackets

The chassis has two pre-installed equipment rack brackets. You may
adjust the brackets so that the front of the chassis is flush with, extends
beyond, or is recessed behind the front of the equipment rack. You may
also install the brackets so that the rear panel of the chassis is flush with
the front of the equipment rack.
You adjust the brackets by removing them and re-installing them in
different positions on the sides of the chassis. The different bracket
positions are listed in Table 22 and illustrated in Figure 32 on page 97 and
Figure 33 on page 97. Please review the following information before
moving the brackets:
Position A, the default position, positions the chassis so that the
front of the unit is flush with the front of the equipment rack.
Position B recesses the front of the chassis by 27.39 mm (1.1 in).
Positions C to E extend the front of the chassis beyond the front of
the rack from 27.39 mm (1.1 in) to 140.85 mm (5.545 in).
Position F installs the chassis with the rear panel flush with the
front of the equipment rack.
To install the rack mount brackets in position “E,” you have to
remove the two chassis screws from the bottom-middle section of
the chassis and re-install them in front where the rack mount
bracket screws were originally, as shown in Figure 32 on page 97.
The dimension (X) between the front panel and the rack rails is
given for each rack mounting bracket position in Table 22.
Table 22. Front Panel to Rack Rail Dimensions
Figure # Front Panel Position
Dimension X
Front Panel to Rack Rail
32 A
(Factory Installed - Flush)
3.69 mm (0.145 in)
32 B
(Recessed)
-27.39 mm (-1.078 in)
32 C 27.39 mm (1.078 in)
32 D 47.71 mm (1.878 in)
32 E 140.85 mm (5.545 in)
33 F
(Reverse Position)
374.16 mm (14.731 in)

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results