Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
Chapter 3: AT-SBx81CFC960 Controller Fabric Card
68 Section I: Hardware Overview

SFP+ Slots

The controller card has four SFP+ slots on the front panel. The slots are
numbered 1 to 4 and have the following functions.
The slots may be used with standard 10Gbps transceivers to add
high speed uplink ports to the Ethernet line cards in the chassis.
For a list of supported transceivers, refer to the Allied Telesis web
site.
The slots may be used with AT-Stack transceivers and the
VCStack Plus feature to create a stack of two chassis that operate
as a single, virtual switch. For more on stacking, refer to Chapter
14, “VCStack Plus Overview” on page 261.
Here are the SFP+ slot guidelines:
The slots on the controller card support standard 10Gbps
transceivers when the VCStack Plus feature is disabled, which is
the default setting.
The slots support only AT-Stack transceivers when the VCStack
Plus feature is enabled.
The slots do not support combinations of standard 10Gbps and
stacking transceivers.
When a chassis has two controller cards, the SFP+ ports on both
cards are active. Consequently, a chassis with two controller cards
has eight active SFP+ slots. This is true whether you are using the
slots with standard 10Gbps transceivers to add high speed uplink
ports to the chassis or with AT-Stack transceivers and the VCStack
Plus feature to build a stack of two chassis.
You may use the slots in any order when you are using them with
standard 10Gbps transceivers.
The cabling configurations for the SFP+ slots and stacking
transceivers are given in “Cabling Configurations for the Stacking
Transceivers” on page 265.
Each SFP+ slot has one LED. The states of the LED are described in
Table 18 on page 69.

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results