Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 289

Setting the Priority Number

This procedure is optional. It explains how to set the stack priority number
on the chassis, which controls the selection of the active controller card for
the stack. For background information, refer to “Priority Numbers” on
page 271. If you do not want to set the priority number, go to “Powering Off
the Chassis” on page 290.
To configure the priority number, perform the following procedure:
1. Enter the CONFIGURE TERMINAL to move from the Privileged Exec
mode to the Global Configuration mode.
awplus# configure terminal
awplus(config)#
2. Enter the STACK PRIORITY command to set the priority number of
the chassis. The format of the command is as follows:
stack <ID_number> priority <priority_number>
The ID_number variable is the switch’s current ID number, displayed
with the SHOW STACK command. The priority_number variable is the
new priority number for the chassis. The range is 0 to 255. The lower
the number, the higher the priority. This example sets the priority
number of the chassis to 1:
awplus(config)# stack 1 priority 1
The switch displays the following prompt:
% Warning: Stacking is currently disabled.
3. Enter the EXIT command to return to the Privileged Exec mode:
awplus(config)# exit
awplus#
4. Enter the SHOW STACK command to confirm your change. Refer to
Figure 174 on page 288. The Priority column should now be displaying
the new priority number for the chassis.
5. Enter the COPY RUNNING-CONFIG command to save your change:
awplus# copy running-config startup-config
This completes the procedure for configuring the chassis for the stacking
feature. Go to “Powering Off the Chassis” on page 290.

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results