Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 283

Displaying the Feature Licenses

The two switches of a stack must have the same feature licenses.
Otherwise, they will not form a stack. To compare the licenses of the
switches, perform the following procedure:
1. Enter the SHOW LICENSE BRIEF command in the Privileged Exec
mode to display the licenses on the switch.
awplus# show license brief
Figure 171 is an example of the information.
Figure 171. SHOW LICENSE BRIEF Command
2. Check the SHOW LICENSE BRIEF command for the following
information:
(1) Verify that the VCStack Plus feature license is included in the
list of licenses. If it is not included, repeat “Activating the VCStack
Plus Feature License” on page 279.
(2) Verify that the VCStack Plus feature is enabled on the switch. If
it is not enabled, repeat “Enabling the Stacking Feature” on
page 281
3. Do one of the following:
If you are configuring the first chassis of the stack, write down on
paper the OEM territory, licenses, and enabled features from the
SHOW LICENSE BRIEF command. You will compare this
information with the license information on the second chassis to
be sure that both units have the same features. After writing the
information, go to “Setting the ID Number” on page 285.
If you are configuring the second chassis, compare the information
displayed by the SHOW LICENSE BRIEF command against the
license information you wrote down on paper when you configured
OEM Territory: ATI USA
Software Feature License
---------------------------------------------------------------------
0 Base License 1 Base License
1 VCStackPlus 1 VCStack-Plus
Current enabled features for displayed licenses:
IPv6Basic, LAG-FULL, MLDSnoop, RADIUS-100, Virtual-MAC, VRRP, VCStack-Plus
1 2

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results