Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 281

Enabling the Stacking Feature

Now that you have activated the VCStack Plus feature license on the
controller card, you may enable the stacking feature, as explained in this
section.
To activate the stacking feature, perform the following procedure:
1. Enter the CONFIGURE TERMINAL command to move from the
Privileged Exec mode to the Global Configuration mode:
awplus# configure terminal
awplus(config)#
2. Enter the STACK ENABLE command to activate the VCStack Plus
feature:
awplus(config)# stack enable
The switch displays the messages in Figure 170
Figure 170. STACK ENABLE Command Messages
The messages are described in Table 24.
% Automatically enabling ‘stack virtual-mac’ to minimize disruption from
failovers.
% Please check that the new MAC 0000.cd37.0c22 is unique within the network.
% Save the config and restart the system for this change to take affect.
Table 24. Descriptions of the STACK ENABLE Command Messages
Message Description
Automatically enabling ‘stack
virtual-mac’ to minimize disruption
from failovers.
This message informs you that
enabling the stacking feature also
activates the virtual MAC address
feature, which allows the two
switches of the stack to use a
single MAC address to
communicate with other network
devices.
Please check that the new MAC
0000.cd37.0c22 is unique within
the network.
This message displays the virtual
MAC address of the switch. The
address is randomly selected from
the range of 0000.cd37.0000 to
0000.cd37.0fff.

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results