Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 277

Displaying the Management Software Version Number

This procedure explains how to display the version number of the
AlliedWare Plus operating software on the active controller card in the
chassis. The two chassis of the stack must have the same version of
operating system. To display the management software version number,
perform the following procedure:
1. Start a local or remote management session on the switch. For
instructions on how to start a local session, refer to “Starting a Local
Management Session” on page 204.
2. When prompted, enter the manager name and password to log on.
The default values are “manager” and “friend,” respectively.
The switch displays the User Exec mode prompt, shown here:
awplus>
3. Enter the ENABLE command to move from the User Exec mode to the
Privileged Exec mode:
awplus> enable
awplus#
4. In the Privileged Exec mode, enter the SHOW SYSTEM command.
awplus# show system
5. Examine the output of the command for the lines in Figure 166.
Figure 166. SHOW SYSTEM Command
Note
If the management software is version 5.4.3 or less, do not continue.
The switch has the older AT-SBx81CFC400 Controller Fabric Card,
which does not support stacking.
6. Do one of the following:
If you are configuring the first chassis of the stack, write down on
paper the software version number of the AlliedWare Plus
operating software on the active controller card. You will compare it
with the same information on the second chassis to confirm that
both units have the same version of management software. After
Current software: SBx81CFC960-5.4.4.rel
Software version : 5.4.4

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results