Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8106 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 273

Stacking Guidelines

Here are the stacking guidelines:
The stack can have two switches.
The switches of the stack must be the same model. The stack can
have two AT-SBx8112 chassis or two AT-SBx8106 chassis. A
stack cannot have one AT-SBx8112 chassis and one AT-SBx8106
chassis.
The trunk that connects the two switches of the stack are built with
AT-StackOP/0.3 or AT-StackOP/9.0 stacking transceivers in the
SFP+ slots in the controller cards.
There cannot be any network devices, such as other switches or
media converters, between the stacking transceivers in the two
switches.
The bandwidth of the trunk depends on the number of controller
cards and stacking transceivers in the switches. The trunk has a
bandwidth of 40 Gbps when each switch has one controller card,
and 80 Gbps when each switch has two controller cards, For more
information, refer to “Stack Trunk and Stacking Transceivers” on
page 263.
The SFP+ slots on the controller cards support the stacking
transceivers only when stacking is enabled on the switch. Standard
SFP+ transceivers are not supported in the SFP+ slots when
stacking is enabled.
When stacking is disabled, the SFP+ slots can be used with
standard SFP+ transceivers, but not with stacking transceivers.
The default setting for stacking is disabled.
The switches have to be assigned ID numbers. The numbers are 1
and 2. The switches must be assigned different numbers. For more
information, refer to “Chassis ID Numbers” on page 270.
A stack should not have more than 400 Ethernet ports.
If both switches of the stack have two controller cards, the SFP+
slots on both the active master and inactive master controller cards
are active in linking the units together and forwarding traffic.
The two switches of the stack must have the same OEM territory
and feature licenses.
The two switches of a stack do not share the AlliedWare Plus
operating system.

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results