Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8106 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 269

Optional Feature Licenses

The SwitchBlade x8112 product has two optional feature licenses that
activate additional features on the switch:
Premium license
AMF Master license
You may install an optional feature license while the switches are
operating as stand-alone units or when they are a stack. However, when
you are initially building the stack, both switches must have the same
optional feature licenses. Otherwise, the two units will not form the stack.
So if you install an optional feature license on one of the switches while it
is operating as a stand-alone unit, you have to install the same feature
license on the second unit as well before building the stack.
Once the two chassis are operating as a stack, you only have to install a
feature license once because the active master controller card
automatically shares it with all the controller cards in the stack.
Here are the guidelines to ordering and installing feature licenses.
Feature licenses are ordered from Allied Telesis on a per chassis
basis.
A chassis that has two controller cards needs only one feature
license.
You have to order two features licenses, one for each chassis,
when building a stack, even though you might only use one of the
licenses.
You may install optional feature licenses either while the switches
are operating as stand-alone units or after they are operating as a
stack.
If the two chassis don’t have any optional feature licenses or have
the same licenses, you might as well wait until after you build the
stack before installing any additional licenses. That way, you only
have to install one feature license for the entire stack.
You cannot build a stack of two chassis that have different feature
licenses. You need to remove or install licenses on the switches
before you build the stack, so they both have the same licenses.
For example, if one chassis has the premium feature license while
the second chassis does not, you have to install the premium
license on the second unit while it is operating as a stand-alone
unit.
The instructions in Chapter 15, “Building a Stack” on page 275 explain
how to determine whether the switches have the same feature licenses.

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results