Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8106 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 263

Stack Trunk and Stacking Transceivers

The two chassis of the stack are connected with the stack trunk. The trunk
consists of the following components:
The four SFP+ slots on the front panel of the AT-SBx81CFC960
Controller Fabric Card.
AT-Stack stacking transceivers from Allied Telesis and fiber optic
cables.
The trunk of the stack can have either four or eight links. The number of
links depends on the number of AT-SBx81CFC960 Controller Fabric
Cards in the switches. Given that the controller card has four SFP+ slots,
the trunk can have four links if both switches have only one controller card
and eight links if both switches have two controller cards.
The stack uses all the links in the trunk to actively forward traffic between
the switches. The bandwidth of the trunk is 40Gbps with four links and
80Gbps with eight links.
There are two stacking transceivers. They are the AT-StackOP/0.3 and
AT-StackOP/9.0 transceivers. Both transceivers use fiber optic cables.
The difference between them is their maximum operating distances. One
transceiver has a maximum operating distance of 300 meters and the
other has a distance of 9 kilometers. The correct transceiver for your
installation will depend on the distance between the two chassis of the
stack. The transceivers are listed in Table 23.
Here are the transceiver guidelines:
The stacking transceivers can only be used in the SFP+ slots on
the AT-SBx81CFC960 Controller Fabric Card and only with the
Table 23. Stacking Transceivers
Stacking
Transceiver Model
Cable Type Operating Distance
AT-StackOP/0.3 62.5/125 µm multi-
mode fiber optic
cable
33 meters (108 feet)
50/125 µm multi-
mode fiber optic
cable
300 meters (984 feet)
AT-StackOP/9.0 9/125 µm single-
mode fiber optic
cable
9 kilometers

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results