Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
Chapter 13: Upgrading the Controller Fabric Card
252 Section II: Installing the Chassis

Before You Begin

The instructions in this chapter explain how to update a chassis from the
AT-SBx81CFC400 Controller Fabric Card to the AT-SBx81CFC960 Card.
Here are the basic steps to the procedure:
1. Download the configuration file on the AT-SBx81CFC400 Controller
Fabric Card to a flash drive with the COPY command in the Privileged
Exec mode of the command line interface.
2. Power off the chassis.
3. Remove the AT-SBx81CFC400 Controller Fabric Cards from the
chassis.
4. Install the new AT-SBx81CFC960 Cards in the chassis.
Note
Do not operate the chassis with both AT-SBx81CFC400 and AT-
SBx81CFC960 Controller Fabric Cards. The controller cards are not
compatible.
5. Power on the chassis.
6. Upload the configuration file from the flash drive to the AT-
SBx81CFC960 Controller Fabric Card with the COPY command.
7. Designate the configuration file as the active configuration file for the
controller card with the BOOT CONFIG-FILE command in the Global
Configuration mode.
8. Reboot the chassis with the REBOOT command in the Privileged Exec
mode.
9. Use the appropriate SHOW commands to confirm the configuration
settings of the Ethernet line cards.
10. Install optional feature licenses.
For step-by-step instructions. refer to “Upgrading the Controller Fabric
Card” on page 254.
Please review the following information before performing the upgrade
procedure:
The premium and AMF master feature licenses for the AT-
SBx81CFC400 Controller Fabric Card are not compatible with the
AT-SBx81CFC960 Card. Consequently, if the AT-SBx81CFC400

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results