Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section II: Installing the Chassis 171

Powering On the AT-SBxPWRSYS1 DC System Power Supply

This section contains instructions on how to power on the AT-

SBxPWRSYS1 DC Power Supply. For installation instructions, refer to

“Installing the AT-SBxPWRSYS1 DC System Power Supply” on page 119.

The power supply unit has a ground connection and positive and negative

DC terminals. You may install the ground and power lead wires with the

terminal lugs that come with the unit or with bare wire. The wire

requirements are slightly different for terminal installation versus bare wire

installation. Here are the wire requirements if you are using the terminals

that come with the power supply:

Two 8 AWG stranded power wires (not provided)
One 10 AWG stranded grounding wire (not provided)

Here are the wire requirements for bare wire installation:

Two 8 AWG solid or stranded power wires (not provided)
One 10 AWG solid or stranded grounding wire (not provided)

Here is a list of the required tools:

Crimping tool (not provided)
8 mm wrench (not provided)
#1, #2, and #3 Phillips-head screwdrivers (not provided)
#3 Phillips-head 30 to 40 inch-lbs Phillips-head torque screwdriver

(optional - not provided)

Here are the procedures for powering on the AT-SBxPWRSYS1 DC

Power Supply:

“Choosing a Method for Attaching the Grounding Wire” on page 173
“Connecting the Grounding Wire with the Grounding Terminal” on

page 173

“Connecting the Grounding Wire with Bare Wire” on page 176
“Choosing a Method for Attaching the Power Wires” on page 178
“Connecting the DC Power Wires with the Straight Terminals” on

page 178

“Connecting the DC Power Wires with the Right Angle Terminals” on

page 187

“Connecting Bare DC Power Wires” on page 193

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results