Allied Telesis AT-SBX81XS6 manual

Allied Telesis AT-SBX81XS6
8.6 · 1
PDF manual
 · 314 pages
English
manualAllied Telesis AT-SBX81XS6
Preface
16

Structure of the Installation Guide

This guide has the following three sections:
Section I: Hardware Overview
The chapters in this section describe the hardware components of the
product, including the Ethernet line cards, AT-SBx81CFC960
Controller Fabric Card, and power supplies. You should start here if
you are unfamiliar with the switch. A basic understanding of the
hardware may help you avoid making mistakes during the installation
procedures.
Section II: Installing the Chassis
The chapters in this section contain the hardware installation
instructions for the device. They explain how to select a site, assemble
the hardware components, cable the ports, power on the unit, and
confirm the hardware operations of the various components. After
completing the instructions in this section, you may either begin to
configure the operating parameters and features of the chassis with
the commands in the command line interface of the AlliedWare Plus

operating systems, as described in the Software Reference for
SwitchBlade x8100 Series Switches, or proceed to Section III to build
a stack of two chassis with the VCStack Plus

feature.

Section III: Building a Stack with the VCStack Plus Feature
The chapters in this section describe the VCStack Plus feature and the
additional hardware and software components required to build a
stack. The section also contains step-by-step instructions on how to
configure the AlliedWare Plus operating systems on the switches for
the stacking feature. You should perform these instructions after you
have installed the two chassis of the stack at their respective sites and
confirmed their operations with the instructions in the chapters in
Section II of this guide. You might want to review the information in
Chapter 14, “VCStack Plus Overview” on page 261 prior to installing
the chassis to acquaint yourself with the feature and guidelines.

Manual

View the manual for the Allied Telesis AT-SBX81XS6 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Allied Telesis AT-SBX81XS6 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Allied Telesis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Allied Telesis AT-SBX81XS6 specifications

Below you will find the product specifications and the manual specifications of the Allied Telesis AT-SBX81XS6.

General
BrandAllied Telesis
ModelAT-SBX81XS6 | AT-SBX81XS6
Productnot categorized
EAN0767035195957, 767035195957, 7670351959574
LanguageEnglish
FiletypeUser manual (PDF)
Optical fiber
Fiber optic connectorSFP+
Data transmission
Data transfer rate10 Gbit/s
Ports & interfaces
Fiber ports quantity6
Performance
Compatibilityx8100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Allied Telesis AT-SBX81XS6 below.

Is the manual of the Allied Telesis AT-SBX81XS6 available in English?

Yes, the manual of the Allied Telesis AT-SBX81XS6 is available in English .

Is your question not listed? Ask your question here

No results