Alcatel-Lucent 8018 manual

Alcatel-Lucent 8018
9.4 · 1
PDF manual
 · 60 pages
English
manualAlcatel-Lucent 8018
SIP Business
8AL90341ENACed01
35 /60

First connection as remote working

When you connect your deskphone for the first time remotely, you are prompted to set a PIN code.
The PIN code is requested when you enter in the VPN configuration (submenus) or when you boot your
deskphone (depending on the VPN configuration).
The PIN code is retained during the session so that you can access the VPN configuration without
having to re-enter your PIN code until you exit the VPN configuration.
Before configuring your phone for remote working, check if you have all the information from your
administrator.
If your set is not provided with a magnetic keyboard, use the alpha-numeric keyboard to enter letters.
To configure your deskphone:
Access to the VPN configuration (see above).
VPN Config
o Enable VPN: you have to activate this option to use your deskphone for remote working.
o Server: enter the address of the VPN server.
o PSK: enter the pre-shared key to establish a secure connection with the VPN server. The
PSK can be unique for all remote workers on a same installation or can be specific to
each remote worker. In the first case, the VPN authentication has to be enabled.
o IKE vers: enter the IKV version (IKEv1/IKEv2).
o IKEv1 aggressive: select this option if IKEv1 is used.
o Validate your choice.
VPN Auth
o Use Authentification, User, Pass: activate this option if a logon to the VPN server
(username and password) is required. The VPN authentication can be disabled in case a
specific PSK is used for each remote worker.
o Validate your choice.
VPN Pincod
o Request Pin on Boot: if this option is activated, the PIN code is required when you boot
your deskphone. We recommend you activate this option.
o Set new Pincode: enter the new PIN code.
o Validate your choice.
VPN DM URL:
o Enter the VPN DM URL where the configuration file is stored.
o Validate your choice.
VPN Default Settings:
o Restore default settings.
o Validate your choice.
The deskphone restarts.
Enter the PIN code if you have selected the option (Request Pin on Boot).
Validate.
Your deskphone is ready for remote working.
If you leave the PIN code request menu when the phone is starting, the phone will start without VPN
activated.

View the manual for the Alcatel-Lucent 8018 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Alcatel-Lucent 8018 or do you need help? Ask your question here

Need help?

Do you have a question about the Alcatel-Lucent and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
L
laura longoOctober 14, 2022

Is it possible to transfer a phone call to another Alcatel device? For example, if I answer on my phone but need to transfer the call to a colleague with a different internal number, how can I do it?

This message has been automatically translated
D
duponMay 14, 2024

si ont na perdu le mot de passe comment faiton pour le répondeur??

The Alcatel-Lucent 8018 is a wired IP phone weighing 675 grams and measuring 164 mm in width, 200 mm in depth, and 170 mm in height. It comes with a single wired handset for convenient usage. The phone features a 2.4-inch LCD display with a resolution of 128 x 64 pixels, providing a clear and easy-to-read interface. With a wall-mountable design, the Alcatel-Lucent 8018 can be easily installed in various locations, saving desk space. The display is equipped with a backlight, allowing for improved visibility in low-light environments. However, the phone does not have touchscreen capabilities. Constructed with quality materials, the Alcatel-Lucent 8018 ensures reliability and durability. Its sturdy build ensures that it can withstand everyday use without compromising performance. The phone’s design and construction prioritize functionality and longevity. The Alcatel-Lucent 8018 serves its purpose as an IP phone, providing users with a reliable and efficient communication solution. It offers a clear display and intuitive interface for users to easily navigate and operate. Designed for use in commercial settings, this phone can handle the demands of a busy work environment. Overall, the Alcatel-Lucent 8018 combines essential features with a durable build, making it a practical choice for individuals or businesses seeking a reliable IP phone.

General
BrandAlcatel-Lucent
Model8018 | 3MG27201AB
Productphone
EAN3326744924530
LanguageEnglish
FiletypeUser manual (PDF)
Design
Product typeIP Phone
Handset typeWired handset
Product colorGray
Wall mountableYes
Weight & dimensions
Weight675 g
Width164 mm
Depth200 mm
Height170 mm
Packaging content
Number of handles included1 pc(s)
Display
DisplayLCD
Display diagonal2.4 "
Display resolution128 x 64 pixels
TouchscreenNo
Display number of colorsMonochrome
Backlight displayYes
Backlight colorWhite
Network
Ethernet LANYes
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Wi-FiNo
BluetoothNo
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af, IEEE 802.3az
Quality of Service (QoS) supportYes
Security algorithmsEAP-TLS, IPSec, MD5, SHA-2, SSH-2, TLS
Ports & interfaces
Ethernet LAN (RJ-45) ports2
RJ-9 ports quantity1
USB 2.0 ports quantity1
Power
Power over Ethernet (PoE)Yes
Audio
SpeakerphoneYes
Noise reductionYes
Voice codecsG.711alaw, G.711ulaw, G.722, G.729ab
Echo cancellationYes
Voice activity detectionYes
Microphone muteYes
Phone features
Full duplexYes
RedialingYes
Phonebook capacity- entries
Caller ID-
Lines quantity- lines
Number of VoIP accounts-
Performance
Hearing aid compatibilityYes
Management features
Volume controlButtons
Number of programmable keys4
Certificates
CertificationEN 60950-1, IEC 60950-1, ANSI/UL 60950-1, AN/CSA-C22.2 NO. 60950-1-07
Operational conditions
Operating temperature (T-T)-5 - 45 °C
Storage temperature (T-T)-25 - 70 °C
Operating relative humidity (H-H)5 - 95 %
Storage relative humidity (H-H)5 - 95 %
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Alcatel-Lucent 8018 below.

What is the weight of the Alcatel-Lucent 8018?

The Alcatel-Lucent 8018 has a weight of 675 g.

What certifications does the Alcatel-Lucent 8018 have?

The Alcatel-Lucent 8018 has the following certifications: EN 60950-1, IEC 60950-1, ANSI/UL 60950-1, AN/CSA-C22.2 NO. 60950-1-07.

What is the screen size of the Alcatel-Lucent 8018?

The screen size of the Alcatel-Lucent 8018 is 2.4 ".

What is the height of the Alcatel-Lucent 8018?

The Alcatel-Lucent 8018 has a height of 170 mm.

What is the screen resolution of the display of the Alcatel-Lucent 8018?

The screen resolution of the Alcatel-Lucent 8018 is 128 x 64 pixels.

What is the width of the Alcatel-Lucent 8018?

The Alcatel-Lucent 8018 has a width of 164 mm.

What is the depth of the Alcatel-Lucent 8018?

The Alcatel-Lucent 8018 has a depth of 200 mm.

How do I set up my Wi-Fi connection on the Alcatel-Lucent 8018?

To set up Wi-Fi, go to the "Settings" menu, select "Wi-Fi," and then choose your network from the available options. Enter the password if required, and you will be connected.

How can I customize the display settings on my Alcatel-Lucent 8018?

To customize display settings, navigate to the "Settings" menu, select "Display," and adjust options such as brightness, wallpaper, font size, and screen timeout according to your preferences.

What should I do if my Alcatel-Lucent 8018 is not charging properly?

If your phone is not charging properly, try using a different charging cable and adaptor. Additionally, ensure the charging port is clean and free of debris. If the issue persists, you may need to consult a technician.

How can I transfer files from my Alcatel-Lucent 8018 to a computer?

To transfer files, connect your phone to the computer using a USB cable. Access the notification panel on your phone, select "USB for File Transfer," and then follow the on-screen prompts to access your phone's storage on the computer.

What should I do if my Alcatel-Lucent 8018 is experiencing frequent app crashes?

If your phone is experiencing frequent app crashes, try clearing the cache and data of the problematic app. You can do this by going to "Settings," selecting "Apps & Notifications," choosing the app, and then selecting "Clear Cache" and "Clear Data." If the issue persists, consider updating the app or contacting the app developer for support.

Is the Alcatel-Lucent 8018 a wired handset phone?

Yes, the Alcatel-Lucent 8018 is a wired handset phone. This means it relies on a physical connection for communication, ensuring stable and uninterrupted calls.

Does the Alcatel-Lucent 8018 have an LCD display?

Yes, the Alcatel-Lucent 8018 features an LCD display. This provides a clear and visible screen for easy navigation and viewing of call-related information.

Can the Alcatel-Lucent 8018 be wall-mounted?

Yes, the Alcatel-Lucent 8018 is wall mountable. This allows for flexibility in placement and saves valuable desk space.

Does the Alcatel-Lucent 8018 have an Ethernet LAN interface?

Yes, the Alcatel-Lucent 8018 has an Ethernet LAN interface, specifically Gigabit Ethernet. This ensures high-speed and reliable connection for data transfer and communication.

Does the Alcatel-Lucent 8018 support Wi-Fi and Bluetooth?

No, the Alcatel-Lucent 8018 does not support Wi-Fi or Bluetooth. However, its Ethernet LAN functionality provides a stable and secure connection for seamless communication.

Is the manual of the Alcatel-Lucent 8018 available in English?

Yes, the manual of the Alcatel-Lucent 8018 is available in English .

Is your question not listed? Ask your question here

No results