Aiwa AV-X120 manual

Aiwa AV-X120
7.3 · 1
PDF manual
 · 52 pages
English
manualAiwa AV-X120

PRECAUTIONS

Owner’s record
For your convenience, record the model number and serial
number (you will find them on the rear of your unit) in the space
provided below. Please refer to them when you contact your
Aiwa dealer in case of difficulty.
Read the Operating Instructions carefully and completely before
operating the unit. Be sure to keep the Operating Instructions
for future reference. All warnings and cautions in the Operating
Instructions and on the unit should be strictly followed, as well
as the safety suggestions below.

Installation

1
2
3
4
5
6
7
Water and moisture Do not use this unit near water, such
as near a bathtub, washbowl, swimming pool, or the like.
Heat Do not use this unit near heat sources, including
heating vents, stoves, or other appliances that generate heat.
It also should not be placed in temperatures less than 5°C
(41‘F) or higher than 35°C (95”F).
Mounting surface Place the unit on a flat, even sutiace.
Ventilation The unit should be situated with adequate
space around it so that proper heat ventilation is assured.
Allow 10 cm (4 in.) clearance from the rear and the top of the
unit, and 5 cm (2 in.) from each side.
- Do not place the unit on a bed, rug, or similar surface that
may block the ventilation openings.
- Do not install the unit in a bookcase, cabinet, or airtight
rack where ventilation may be impeded.
Objects and liquid entry —Take care that objects or liquids
do not get inside the unit through the ventilation openings.
Carts and stands When-
placed or mounted on a stand
or cart, the unit should be
moved with care.
Quick stops, excessive force,
and uneven surfaces may
cause the unit or cart to overturn
or fall.
Wall or ceiling mounting —The unit should not be mounted
on a wall or ceiling, unless specified in the Operating
Instructions.

Electric Power

1 Power sources Connect this unit only to power sources
specified in the Operating Instructions, and as marked on
the unit.
2 Polarization As a safety feature, some units are equipped
with polarized AC power plugs which can only be inserted
one way into a power outlet. If it is difficult or impossible to
insert the AC power plug into an outlet, turn the plug over
and try again. If it is not still inserted easily into the outlet,
please call a qualified service technician to service or replace
the outlet. To avoid defeating the safety feature of the
polarized plug, do not force it into a power outlet.
3 AC power cord
- When disconnecting the AC power cord, pull it out by the
AC power plug. Do not pull the cord itself.
- Never handle the AC power plug with wet hands, as this
could result
in fire or shock.
-
Power cords should be firmly secured to avoid being
severely bent, pinched, or walked upon. Pay particular
attention to the cord from the unit to the power socket.
- Avoid overloading AC power plugs and extension cords
beyond their capacity, as this could result in fire or shock.
4 Extension cord To help prevent electric shock, do not
use a polarized AC power plug with an extension cord,
receptacle, or other outlet unless the polarized plug can be
completely inserted to prevent exposure of the blades of the
plug.
Model No.
Serial No. (Lot No.)
AV-X120 {
1 ENGLISH

Manual

View the manual for the Aiwa AV-X120 here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Aiwa AV-X120 or do you need help? Ask your question here

Need help?

Do you have a question about the Aiwa and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
V
VinceMay 26, 2023

How do I fix the light on my receiver which has dimmed.

1 comment
G
GinCJuly 16, 2023

I would like to know about the dimming also. Any fix?

Aiwa AV-X120 specifications

Below you will find the product specifications and the manual specifications of the Aiwa AV-X120.

The Aiwa AV-X120 is a receiver that is designed to enhance the audio experience in a home theater setup. With its sleek and compact design, it seamlessly integrates into any entertainment system. Featuring a wide range of connectivity options, including HDMI, optical, and analog inputs, the AV-X120 allows for easy and convenient connection to various multimedia devices such as televisions, DVD players, and gaming consoles. It supports multiple audio formats, including Dolby Digital and DTS, ensuring a high-quality and immersive sound experience. The receiver also boasts a powerful amplifier, delivering clear and dynamic audio output. It provides ample power to drive speakers and subwoofers, creating a rich and well-balanced soundstage. Equipped with intuitive controls and a user-friendly interface, the AV-X120 allows for easy navigation and adjustment of settings. It also includes a remote control, providing convenient operation from a distance. In addition to its audio capabilities, the AV-X120 features video switching and upscaling capabilities, allowing for seamless integration of video sources and enhanced image quality. Overall, the Aiwa AV-X120 is a versatile and reliable receiver that offers a range of features to enhance the audio and video experience in a home theater setup. Its connectivity options, powerful amplifier, and intuitive controls make it a great choice for audio enthusiasts and movie lovers alike.

General
BrandAiwa
ModelAV-X120
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Aiwa AV-X120 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What should I do if there is no sound coming from the Aiwa AV-X120 receiver?

To troubleshoot no sound coming from the Aiwa AV-X120 receiver, follow these steps: 1. Check if the AC cord is connected properly. 2. Verify if there is an incorrect connection in the setup. 3. Look for any short circuits in the speaker terminals and correct the connections. 4. Ensure that no incorrect function button is pressed. 5. Confirm that the FRONT SPEAKERS A and B buttons are set correctly. 6. Adjust the BALANCE control for sound balance. 7. Make sure all speakers are connected and not disconnected. 8. Check if the MUTING button is pressed, as it may lower the volume. 9. If the issue persists, reset the unit by turning off the power and pressing the SET button simultaneously. These steps should help resolve the issue of no sound from the Aiwa AV-X120 receiver.

How can I troubleshoot if sound is emitted from only one speaker on the Aiwa AV-X120 receiver?

To troubleshoot if sound is emitted from only one speaker on the Aiwa AV-X120 receiver, follow these steps: 1. Check the speaker connections: Ensure that the speaker cords are properly connected to the corresponding speaker terminals on the unit with the correct polarity (+ to +, - to -). 2. Verify speaker impedance: Set the SPEAKER IMPEDANCE SELECTOR on the rear of the unit to match the impedance value of the front and center speakers (4 ohms or 8 ohms). 3. Position the speakers correctly: Place the front, center, and surround speakers in optimal positions for the Dolby ProLogic or DSP effect. 4. Adjust speaker levels: Use the built-in noise sequencer to balance the sound levels of all four channels for consistent loudness from each speaker at your listening position.

Is the manual of the Aiwa AV-X120 available in English?

Yes, the manual of the Aiwa AV-X120 is available in English .

Is your question not listed? Ask your question here

No results