The frame rate of video transmitted from the device depends on connection bandwidth
between client and server, video resolution, codec type, and quality setting of server. Here
is a guideline to help you roughly estimate the bandwidth requirements form your device.
The required bandwidth depends on content of video source. The slow motion video will
produce smaller bit rate generally and fast motion will produce higher bit rate vice versa.
Actual results generated by the device may be varying.
Image
Resolution
Average range of data
sizes for JPEG mode
Average bit rate for
MPEG4 mode
Average bit rate for
H.264 mode
160 x 120
(QQVGA)
3 ~ 6k byte per frame64kbps~256kbps
@ 30fps
32kbps~192kbps
@ 30fps
320 x 240
(QVGA)
8 ~ 20k byte per frame256kbps~768kbps
@ 30fps
192kbps~512kbps
@ 30fps
640 x 480
(VGA)
20 ~ 50K byte per
frame
512kbps~2048kbps
@ 30fps
384kbps~1536kbps
@ 30fps
1280x1024
(SXGA)
100 ~ 200k byte per
frame
NA 512kbps~3076kbps
@ 15fps
Note: Audio streaming also takes bandwidth around 32kbps. Some xDSL/Cable modem
upload speeds could not even reach up to 128 kbps. Thus, you may not be able to receive
good quality video while also streaming audio on a 128 kbps or lower connection. Even
though the upload speed is more than 128kbps, for optimal video performance, disabling
audio streaming will get better video performance.
E. Configure Port Forwarding Manually
The device can be used with a router. If the device wants to be accessed from the WAN, its
IP address needs to be setup as fixed IP address, also the port forwarding or Virtual Server
function of router needs to be setup. This device supports UPnP traversal function.
Therefore, user could use this feature to configure port forwarding of NAT router first.
However, if user needs to configure port forwarding manually, please follow the steps as
below:
Manually installing the device with a router on your network is an easy 3–step procedure as
following:
Manual
View the manual for the AirLive BC-5010 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the AirLive BC-5010 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the AirLive BC-5010 below.
What is the weight of the AirLive BC-5010?
The AirLive BC-5010 has a weight of 365 g.
What is a megapixel?
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
What does the abbreviation 'MP' stand for?
MP stands for MegaPixels.
What is the height of the AirLive BC-5010?
The AirLive BC-5010 has a height of 65 mm.
What is the width of the AirLive BC-5010?
The AirLive BC-5010 has a width of 65 mm.
What is the depth of the AirLive BC-5010?
The AirLive BC-5010 has a depth of 135 mm.
Is the manual of the AirLive BC-5010 available in English?
Yes, the manual of the AirLive BC-5010 is available in English .
Need help?
Do you have a question about the AirLive and is the answer not in the manual?
Question and answer
Number of questions: 0