View the manual for the AEG LX8-2-ÖKO here, for free. This manual comes under the category vacuum cleaners and has been rated by 2 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the AEG LX8-2-ÖKO or do you need help? Ask your question here


Below you will find the product specifications and the manual specifications of the AEG LX8-2-ÖKO.
| Brand | AEG |
| Model | LX8-2-ÖKO | 900 278 701 |
| Product | vacuum cleaner |
| EAN | 7332543561711 |
| Language | English |
| Filetype | User manual (PDF) |
| Maximum input power | 600 W |
| Annual energy consumption | 21.5 kWh |
| Type | Cylinder vacuum |
| Cleaning type | Dry |
| Dust container type | Bagless |
| Product color | Black, Grey, Stainless steel |
| Dust capacity | - L |
| Tube type | Telescopic |
| Tube material | Aluminum |
| Width | 295 mm |
| Depth | 432 mm |
| Height | 320 mm |
| Weight | 5130 g |
| Vacuum air filtering | Allergy Plus, Micro |
| Dirt separating method | Cyclonic |
| Washable filter | Yes |
| Proper use | Home |
| Cleaning surfaces | Hard floor |
| Noise level | - dB |
| Operating radius | 12 m |
| Cord length | 9 m |
| On/off switch | Yes |
| Cord storage | Yes |
| Automatic cord rewinder | - |
| Dust container full indicator | - |
| Carrying handle(s) | Yes |
| Vacuum brushes included | Parquet brush |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the AEG LX8-2-ÖKO below.
Your AEG vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The AEG LX8-2-ÖKO has a weight of 5130 g.
The AEG LX8-2-ÖKO has a height of 320 mm.
The AEG LX8-2-ÖKO has a width of 295 mm.
The AEG LX8-2-ÖKO has a depth of 432 mm.
The maximum input power of the AEG LX8-2-ÖKO is 600 W. This makes it suitable for efficient cleaning while consuming relatively low power.
The annual energy consumption of the AEG LX8-2-ÖKO is 21.5 kWh. This indicates that it is an energy-efficient vacuum cleaner, allowing users to save on electricity bills.
The AEG LX8-2-ÖKO is a cylinder vacuum cleaner. This type of vacuum cleaner typically offers powerful suction and efficient cleaning performance.
The AEG LX8-2-ÖKO is designed for dry cleaning. It excels at effectively removing dust, dirt, and debris from various surfaces in your home.
Yes, the AEG LX8-2-ÖKO comes with a washable filter. This feature allows users to easily clean and maintain the filter, promoting better performance and prolonging the lifespan of the vacuum cleaner.
To assemble and disassemble the AEG LX8-2-ÖKO vacuum cleaner, follow these steps: 1. Adjust the telescopic tube: Hold the lock with one hand and pull the handle with the other hand to adjust the length of the telescopic tube. 2. Connect the power cord: Pull out the power cord and plug it into a power outlet. 3. Turn on/off the vacuum cleaner: Press the ON/OFF button to turn on the vacuum cleaner. Press the button again to turn it off. 4. Store the accessories: Insert the nozzle parking clip into one of the two parking slots located under or on the back of the machine. You can also attach the hose to the clip on the tube for more compact storage. 5. Rewind the power cord: After using the vacuum cleaner, press the REWIND button to rewind the power cord. By following these steps, you can easily assemble and disassemble the AEG LX8-2-ÖKO vacuum cleaner for convenient use and storage.
If the AEG LX8-2-ÖKO vacuum cleaner is not turning on, you can try the following troubleshooting steps: 1. Check the power connection: Ensure that the power cord is properly plugged into the power outlet. 2. Inspect the cord and plug: Verify that the power cord and plug are not damaged. 3. Check for a blown fuse: Examine the fuse box or circuit breaker to see if a fuse has blown. 4. Clear any hose blockages: Squeeze the hose to remove any obstructions, but be cautious if the blockage is caused by glass or needles. 5. Contact an authorized service center: If the above steps do not resolve the issue, it may be necessary to have the motor replaced by an authorized AEG service center. By following these steps, you can troubleshoot and address the issue of the AEG LX8-2-ÖKO vacuum cleaner not turning on.
To adjust the suction power of the AEG LX8-2-ÖKO vacuum cleaner, follow these steps: 1. Locate the power control: Look for the power control button or dial on the vacuum cleaner. 2. Increase suction power: If you want to increase the suction power, turn the power control button or dial to the right. 3. Decrease suction power: If you want to decrease the suction power, turn the power control button or dial to the left. 4. Test the suction power: While vacuuming, adjust the power control to find the desired suction power level. You can try different settings to see which one works best for your cleaning needs. By following these steps, you can easily adjust the suction power of the AEG LX8-2-ÖKO vacuum cleaner to suit your cleaning preferences and the type of surface you are cleaning.
If the AEG LX8-2-ÖKO vacuum cleaner is not picking up dirt effectively, you can try the following steps: 1. Check the dust container: Ensure that the dust container is not overfilled. If it is, empty the container to the MAX line. 2. Clean or replace the filter: If the filter behind the dust container is dirty, clean it or replace it as instructed in the manual. 3. Check for blockages: Inspect the hose, nozzle, and brush for any blockages or obstructions. Clear any debris that may be hindering the suction. 4. Adjust the suction power: Increase the suction power using the power control button or dial to enhance the cleaning performance. 5. Clean the cyclone area: If applicable, remove the cyclone cone and rinse it with water if needed. Allow it to dry for 24 hours before reattaching it. By following these steps, you can address the issue of the AEG LX8-2-ÖKO vacuum cleaner not picking up dirt effectively and improve its cleaning performance.
According to the manual of the AEG LX8-2-ÖKO vacuum cleaner, you should empty the dust container regularly to ensure optimal performance. Here are the steps: 1. Check the dust container: Monitor the dust container's fill level during use. 2. Empty the dust container: When the dust container reaches the MAX line or becomes full, it is time to empty it. 3. Release the dust container: Press the button on top of the vacuum cleaner to unlock and remove the dust container. 4. Dispose of the dust: Empty the contents of the dust container into a waste bin. 5. Reattach the dust container: Place the dust container back into the vacuum cleaner and ensure it is securely locked in place. By following these steps and regularly emptying the dust container, you can maintain the cleaning efficiency of the AEG LX8-2-ÖKO vacuum cleaner.
To assemble and disassemble the AEG LX8-2-ÖKO vacuum cleaner, follow these steps: 1. Adjust the telescopic tube: Hold the lock with one hand and pull the handle with the other hand to adjust the length of the telescopic tube. 2. Connect the power cord: Pull out the power cord and plug it into a power outlet. 3. Turn on/off the vacuum cleaner: Press the ON/OFF button to turn on the vacuum cleaner. Press the button again to turn it off. 4. Store the accessories: Insert the nozzle parking clip into one of the parking slots located under or on the back of the machine. You can also attach the hose to the clip on the tube for more compact storage. 5. Rewind the power cord: After using the vacuum cleaner, press the REWIND button to rewind the power cord. By following these steps, you can easily assemble and disassemble the AEG LX8-2-ÖKO vacuum cleaner for convenient use and storage.
If the AEG LX8-2-ÖKO vacuum cleaner is not turning on, you can try the following troubleshooting steps: 1. Check the power connection: Ensure that the power cord is properly plugged into the power outlet. 2. Inspect the cord and plug: Verify that the power cord and plug are not damaged. 3. Check for a blown fuse: Examine the fuse box or circuit breaker to see if a fuse has blown. 4. Clear any hose blockages: Squeeze the hose to remove any obstructions, but be cautious if the blockage is caused by glass or needles. 5. Contact an authorized service center: If none of the above steps resolve the issue, it may be necessary to have the motor replaced by an authorized AEG service center. By following these steps, you can troubleshoot and address the issue of the AEG LX8-2-ÖKO vacuum cleaner not turning on.
To adjust the suction power of the AEG LX8-2-ÖKO vacuum cleaner, follow these steps: 1. Locate the power control: On the vacuum cleaner, find the power control button or dial. 2. Increase suction power: Turn the power control dial or press the button towards the right to increase the suction power. 3. Decrease suction power: Turn the power control dial or press the button towards the left to decrease the suction power. 4. Test the suction power: While vacuuming, adjust the power control to find the desired suction power level that suits your cleaning needs. 5. Fine-tune the suction power: If necessary, make small adjustments to the power control to achieve the optimal suction power for different surfaces or cleaning tasks. By following these steps, you can easily adjust the suction power of the AEG LX8-2-ÖKO vacuum cleaner to ensure efficient and effective cleaning performance.
If the AEG LX8-2-ÖKO vacuum cleaner is not picking up dirt effectively, you can try the following troubleshooting steps: 1. Check the suction power: Ensure that the suction power is set to an appropriate level for the type of surface you are cleaning. Increase the suction power if necessary. 2. Inspect the brush roll: Check if the brush roll is spinning properly. If it is not, remove any tangled hair, fibers, or debris from the brush roll. 3. Clean or replace the filters: Dirty or clogged filters can affect the vacuum cleaner's performance. Clean or replace the filters according to the manufacturer's instructions. 4. Empty the dust container: If the dust container is full, it can reduce the vacuum cleaner's suction power. Empty the dust container and clean it thoroughly. 5. Check for blockages: Inspect the hose, wand, and nozzle for any blockages. Clear any obstructions that may be preventing proper suction. By following these steps, you can address common issues that may be causing the AEG LX8-2-ÖKO vacuum cleaner to not pick up dirt effectively and restore its performance.
According to the manual of the AEG LX8-2-ÖKO vacuum cleaner, the frequency of emptying the dust container depends on the level of filling. Here are the steps: 1. Check the dust container: Monitor the level of dust in the container during use. 2. Maximum fill line: Do not exceed the MAX line indicated on the dust container. If the dust reaches this line, it is time to empty the container. 3. Emptying the dust container: To empty the dust container, press the button on top of the vacuum cleaner and carefully pull out the container. Dispose of the dust in a waste bin. 4. Cleaning the container: After emptying, you can clean the dust container with water if needed. Let it dry for 24 hours before reattaching it to the machine. By following these steps, you can ensure that the dust container of the AEG LX8-2-ÖKO vacuum cleaner is emptied regularly for optimal performance.
Yes, the manual of the AEG LX8-2-ÖKO is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the AEG and is the answer not in the manual?
Question and answer
Number of questions: 0