AEG L7WEE861R manual

AEG L7WEE861R
7.2 · 1
PDF manual
 · 44 pages
English
manualAEG L7WEE861R

Changing the delay start after

the countdown has started

To change the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows
the desired delay time.
3. Touch the Start/Pause button again
to start the new countdown.

10.8 The ProSense load

detection

The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pause button,
the maximum declared load indicator
goes off, the indicator
flashes, the
ProSense starts the laundry load
detection:
1. The appliance detects the load in the
first 30 seconds: the indicator and
the time dots
flash, the drum
rotates shortly.
2. At the end of the load detection, the
indicator
goes off and the time
dots
stop flashing. The programme
duration will be adjusted accordingly
and could increase or decrease. After
further 30 seconds, the water filling
starts.
At the end of the load detection, in case
of drum overload, the indicator is
flashing in the display:
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start the
programme again. The ProSense phase
can be repeated up to three times (see
point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again
depending on the capacity
of water absorption of the
fabrics.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).

10.9 Programme phase

indicators

When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running:
.
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running: .
If you select the Steam programme the
steam phase indicator comes on.

10.10 Interrupting a

programme and changing the

options

When the programme is running, you
can change only some options:
1. Touch the button Start/Pause.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pause again.
The washing programme continues.
ENGLISH
25

Manual

View the manual for the AEG L7WEE861R here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the AEG L7WEE861R or do you need help? Ask your question here

Index

Need help?

Do you have a question about the AEG and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

AEG L7WEE861R specifications

Below you will find the product specifications and the manual specifications of the AEG L7WEE861R.

General
BrandAEG
ModelL7WEE861R | 914 605 149
Productwashing machine
EAN7332543549238
LanguageEnglish
FiletypeUser manual (PDF)
Design
Loading typeFront-load
Appliance placementFreestanding
Product colorWhite
Built-in displayYes
Control typeRotary
Custom panel-readyYes
Door hingeLeft
Inverter technology-
Drum volume69 L
Viewing windowYes
Power
Energy efficiency scaleA to G
Energy consumption washing & drying per cycle5.44 kWh
Energy consumption washing per cycle0.9 kWh
AC input frequency50 Hz
AC input voltage230 - 240 V
Connected load2200 W
Water consumption washing per cycle47 L
Water consumption washing & drying per cycle70 L
C
E
63 kWh
376 kWh
Performance
Noise level (wash)51 dB
Noise level (spin)76 dB
Noise level (drying)60 dB
Drying capacity6 kg
Washing capacity8 kg
Spin-drying classB
Maximum spin speed1600 RPM
AquaStop functionYes
Add garment (pause) functionYes
Delayed start timerYes
Delay start (max)24 h
Anti-Crease functionYes
Adjustable spin speedYes
Half-load-
Stain remover optionYes
Self-cleaningYes
Load balancing systemYes
Cold, Cotton, Daily care, Wool, Quick, Synthetics, Spin/drain, Delicate/silk
Freshen-up, Cotton, Synthetics
B
Weight & dimensions
Width600 mm
Depth605 mm
Height850 mm
Management features
Wi-Fi controlled-
Ergonomics
Drum interior light-
Adjustable feetYes
Remaining time indication-
Child lockYes
Cord length1.8 m
Inlet hose length1.3 m
Outlet hose length1.4 m
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the AEG L7WEE861R below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the height of the AEG L7WEE861R?

The AEG L7WEE861R has a height of 850 mm.

What is the width of the AEG L7WEE861R?

The AEG L7WEE861R has a width of 600 mm.

What is the depth of the AEG L7WEE861R?

The AEG L7WEE861R has a depth of 605 mm.

Is the manual of the AEG L7WEE861R available in English?

Yes, the manual of the AEG L7WEE861R is available in English .

Is your question not listed? Ask your question here

No results