AEG HK604201CB manual

AEG HK604201CB
5.8 · 1
PDF manual
 · 76 pages
English
manualAEG HK604201CB

3. ASENNUS

VAROITUS!
Lue turvallisuutta koskevat luvut.

3.1 Ennen asentamista

Kirjoita alla olevat tiedot ylös arvokilvestä
ennen keittotason asentamista. Arvokilpi
sijaitsee keittotason pohjassa.

Sarjanumero ...........................

3.2 Kalusteeseen sijoitettavat

keittotasot

Kalusteeseen sijoitettavia keittotasoja saa
käyttää vasta, kun ne on asennettu sopiviin,
määräystenmukaisiin kalusteisiin ja
työtasoihin.

3.3 Virtajohto

Keittotason tehonsyöttö on järjestetty
virtajohdolla.
Käytä vaurioituneen virtajohdon
vaihtamiseksi virtajohtotyyppiä: H05V2V2-
F joka kestää vähintään 90 °C lämpötilan.
Ota yhteys valtuutettuun
huoltoliikkeeseen. Virtajohdon saa vaihtaa
vain sähköasentaja.

3.4 Kytkentäkaavio

220V-240V
N N
220V-240V
220V-240V
PE
L L
220V-240V 1N
220V-240V
N PE
L
400V 2N
220V-240V
220V-240V
N
L1
L2
PE
Aseta sivuvirtapiirit ruuvien
väliin kuvan mukaisesti.

3.5 Kokaminen

Jos keittotaso asennetaan liesituulettimen
alapuolelle, katso laitteiden välinen
vähimmäisetäisyys liesituulettimen
asennusohjeista.
SUOMI 37

Manual

View the manual for the AEG HK604201CB here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the AEG HK604201CB or do you need help? Ask your question here

Index

Need help?

Do you have a question about the AEG and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

AEG HK604201CB specifications

Below you will find the product specifications and the manual specifications of the AEG HK604201CB.

General
BrandAEG
ModelHK604201CB
Productstove
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the AEG HK604201CB below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

How can I troubleshoot if the AEG HK604201CB stove is not saving energy as expected?

To troubleshoot if the AEG HK604201CB stove is not saving energy as expected, you can follow these steps: 1. Use the appropriate amount of water: When heating up water, make sure to use only the amount you need. This helps to minimize energy consumption. 2. Put lids on cookware: Whenever possible, always put lids on the cookware while cooking. This helps to retain heat and reduce energy loss. 3. Properly position the cookware: Before activating the cooking zone, ensure that the cookware is placed correctly on it. This allows for efficient heat transfer and reduces energy waste. 4. Match cookware size with cooking zones: Put smaller cookware on the smaller cooking zones. This ensures that the heat is evenly distributed and prevents energy wastage. 5. Center the cookware on the cooking zone: Place the cookware directly in the center of the cooking zone. This helps to maximize heat transfer and minimize energy loss. 6. Utilize residual heat: After cooking, you can use the residual heat of the stove to keep the food warm or melt it. This avoids the need for additional energy consumption. Remember to follow these energy-saving practices to optimize the efficiency of your AEG HK604201CB stove.

What should I do if the AEG HK604201CB stove is not displaying any information about energy saving features?

If the AEG HK604201CB stove is not displaying any information about energy saving features, you can try the following steps: 1. Check the user interface: Ensure that the stove's user interface is functioning properly. Make sure that the display is not blank or showing any error messages. 2. Verify the selected cooking mode: Confirm that you have selected the appropriate cooking mode that supports energy-saving features. Refer to the stove's user manual for information on the available cooking modes and their energy-saving capabilities. 3. Check for any activated power-saving settings: Some stoves have power-saving settings that can be enabled or disabled. Check the stove's settings menu to see if there is an option to activate or deactivate power-saving features. If it is disabled, enable it and see if the energy-saving information appears. 4. Restart the stove: Try restarting the stove by turning it off and then back on again. This can help reset any temporary issues that may be causing the energy-saving information not to display. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact AEG customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the stove if necessary. Remember to consult the AEG HK604201CB stove's user manual for more detailed instructions and information on energy-saving features.

How can I troubleshoot if the AEG HK604201CB stove is not recycling materials properly?

To troubleshoot if the AEG HK604201CB stove is not recycling materials properly, you can follow these steps: 1. Check for recycling symbols: Look for the recycling symbol on the packaging materials. The symbol is usually represented as a triangle with arrows forming a loop. Ensure that the materials you want to recycle have this symbol. 2. Separate the materials: Separate the packaging materials from the stove itself. Place the packaging materials in appropriate containers designated for recycling. This helps to ensure that the materials are properly sorted for recycling. 3. Dispose of the materials correctly: Do not dispose of the appliances marked with the recycling symbol with household waste. Instead, take the product to your local recycling center or contact your municipality for proper disposal instructions. They can provide guidance on where to return the product for recycling. By following these steps, you can ensure that the AEG HK604201CB stove's packaging materials are recycled properly, contributing to environmental protection and the recycling of electrical and electronic waste.

What should I do if the AEG HK604201CB stove does not comply with EU 66/2014 regulations?

If the AEG HK604201CB stove does not comply with EU 66/2014 regulations, you can take the following steps: 1. Verify the compliance label: Check if the stove has a compliance label indicating its conformity with EU 66/2014 regulations. The label is usually located on the back or side of the appliance. Ensure that the label is present and legible. 2. Contact customer support: If you find that the stove does not have the required compliance label or if you have any doubts about its compliance, it is recommended to contact AEG customer support. They can provide guidance and assistance regarding the stove's compliance with EU regulations. 3. Provide necessary information: When contacting customer support, be prepared to provide the stove's model number, serial number, and any other relevant information. This will help the support team better understand your situation and provide appropriate solutions. 4. Follow the instructions provided: Based on the information you provide, customer support will guide you on the necessary steps to ensure compliance with EU regulations. They may arrange for a technician to inspect the stove or provide instructions for resolving any compliance issues. By following these steps and seeking assistance from AEG customer support, you can address any concerns regarding the AEG HK604201CB stove's compliance with EU 66/2014 regulations.

How can I troubleshoot if the AEG HK604201CB stove is not displaying the manual in the desired language?

To troubleshoot if the AEG HK604201CB stove is not displaying the manual in the desired language, you can follow these steps: 1. Check the available languages: Verify the languages supported by the AEG HK604201CB stove's manual. The manual may be available in multiple languages, such as English, Swedish, Danish, Norwegian, and Finnish. 2. Select the desired language: Determine the language you want to view the manual in. Choose the language that is most convenient for you and that you can understand. 3. Access the manual in the desired language: Locate the language selection option in the stove's user interface or settings menu. Use the controls or buttons provided to select the desired language. 4. Confirm the language change: After selecting the desired language, check if the manual is now displayed in the chosen language. Ensure that the information and instructions are now presented in the language you selected. If the desired language is not available or if you encounter any difficulties in changing the language, it is recommended to contact AEG customer support for further assistance. They can provide specific instructions or alternative solutions to help you access the manual in your preferred language.

How can I troubleshoot if the AEG HK604201CB stove is not saving energy as expected?

To troubleshoot if the AEG HK604201CB stove is not saving energy as expected, you can follow these steps: 1. Use only the amount of water you need when heating up water. This helps to minimize energy consumption. 2. Always put lids on the cookware if possible. This helps to retain heat and reduce cooking time, saving energy in the process. 3. Before activating the cooking zone, make sure to place the cookware on it. This ensures that the heat is directly transferred to the cookware, optimizing energy efficiency. 4. Put smaller cookware on the smaller cooking zones. This allows for better heat distribution and prevents energy wastage. 5. Place the cookware directly in the center of the cooking zone. This ensures even heat distribution and reduces the need for excessive energy usage. 6. Utilize residual heat to keep food warm or melt it. Instead of using additional energy, take advantage of the residual heat from the cooking process. By following these steps, you can troubleshoot and improve the energy-saving performance of your AEG HK604201CB stove.

What should I do if the AEG HK604201CB stove is not heating up properly?

If the AEG HK604201CB stove is not heating up properly, you can try the following steps to troubleshoot the issue: 1. Check if there is any object placed on the sensor fields. Remove any objects from the sensor fields as they can interfere with the stove's operation. 2. Ensure that there is no object placed on the specific sensor field that is not heating up. Remove any objects from the sensor field to allow proper heating. 3. If the residual heat indicator does not come on, it could be because the zone operated for a short time or the sensor is damaged. If the zone operated sufficiently long to be hot, you should contact an Authorized Service Centre for assistance. 4. If the heat setting changes between two levels, it may be due to power management operation. Refer to the "Daily use" section in the manual for more information on power management. 5. If the sensor fields become hot, it could be because the cookware is too large or placed too near to the controls. Try placing large cookware on the rear zones, if possible. If these troubleshooting steps do not resolve the issue, it is recommended to contact your dealer or an Authorized Service Centre for further assistance.

How can I troubleshoot if the AEG HK604201CB stove is not displaying the correct energy efficiency information?

To troubleshoot if the AEG HK604201CB stove is not displaying the correct energy efficiency information, you can follow these steps: 1. Check the model identifier of your stove (HK604201CB) to ensure it matches the information provided in the manual. 2. Verify that the energy consumption per cooking zone matches the values specified in the manual. The values should be expressed in Wh/kg (watt-hours per kilogram). 3. Ensure that the energy consumption of the stove as a whole (EC electric hob) matches the value stated in the manual. This value should also be expressed in Wh/kg. 4. If the displayed energy efficiency information does not match the values in the manual, try resetting the stove. You can do this by turning off the power supply to the stove for a few minutes and then turning it back on. 5. If the issue persists, it is recommended to contact an Authorized Service Centre for further assistance. They will be able to diagnose and resolve any technical issues related to the energy efficiency display. By following these steps, you can troubleshoot and address any discrepancies in the energy efficiency information displayed on your AEG HK604201CB stove.

What should I do if the AEG HK604201CB stove is not recycling materials properly?

If the AEG HK604201CB stove is not recycling materials properly, you can try the following steps to address the issue: 1. Ensure that you are using cookware with the appropriate symbols for recycling. Look for symbols such as the recycling symbol or the symbol indicating that the cookware is suitable for recycling. 2. Check if the cookware you are using is compatible with the stove. Some cookware materials may not be suitable for recycling or may not work efficiently with the stove. Refer to the manual for information on compatible cookware materials. 3. Clean the cookware thoroughly before placing it on the stove. Residue or food particles on the cookware can affect its recycling performance. Use appropriate cleaning methods recommended for the specific cookware material. 4. If the stove has specific recycling settings or modes, ensure that you have selected the correct setting for the type of cookware you are using. Refer to the manual for instructions on how to select the appropriate recycling settings. 5. If the issue persists, it is recommended to contact an Authorized Service Centre for further assistance. They will be able to diagnose and resolve any technical issues related to the stove's recycling functionality. By following these steps, you can troubleshoot and improve the recycling performance of your AEG HK604201CB stove.

How can I troubleshoot if the AEG HK604201CB stove is not available in my preferred language?

If the AEG HK604201CB stove is not available in your preferred language, you can try the following steps to troubleshoot the issue: 1. Check if the stove supports multiple languages. Some models may have language options available, while others may only have a single language. 2. If the stove supports multiple languages, check the settings menu to see if you can change the language. Look for language-related options or settings that allow you to select your preferred language. 3. If your preferred language is not available in the stove's settings, it may indicate that the manual does not provide instructions in your language. In this case, you can try contacting the manufacturer or checking their website for language-specific manuals or guides. 4. If you are unable to find a manual in your preferred language, you can use online translation tools or services to translate the relevant sections or seek assistance from someone who is fluent in a language that the manual is available in. By following these steps, you can troubleshoot and explore options to address the issue of the AEG HK604201CB stove not being available in your preferred language.

How can I troubleshoot if the AEG HK604201CB stove is not saving energy as expected?

To troubleshoot if the AEG HK604201CB stove is not saving energy as expected, you can follow these steps: 1. Use only the amount of water you need when heating up water. This helps to minimize energy consumption. 2. Always put lids on the cookware if possible. This helps to retain heat and reduce cooking time, saving energy in the process. 3. Before activating the cooking zone, make sure to place the cookware on it. This ensures that the heat is directly transferred to the cookware, optimizing energy efficiency. 4. Put smaller cookware on the smaller cooking zones. This allows for better heat distribution and prevents energy wastage. 5. Place the cookware directly in the center of the cooking zone. This ensures even heat distribution and reduces the need for excessive energy usage. 6. Utilize residual heat to keep food warm or melt it. Instead of using additional energy, take advantage of the residual heat from the cooking process. By following these steps, you can troubleshoot and improve the energy-saving performance of your AEG HK604201CB stove.

What should I do if the AEG HK604201CB stove is not heating efficiently?

To troubleshoot if the AEG HK604201CB stove is not heating efficiently, you can follow these steps: 1. Check if there is any object placed on the sensor field. Remove the object from the sensor field as it may interfere with the stove's performance. 2. Verify if the residual heat indicator is not turning on. If the cooking zone has only been turned on for a short period of time, it may not be hot yet. Alternatively, the sensor may be damaged. In such cases, contact an authorized service center for assistance. 3. Ensure that the power management feature is not activated. Refer to the "Daily use" section in the manual for instructions on how to disable the power management feature. 4. Make sure that the cookware being used is not too large or placed too close to the control knobs. If possible, use larger cookware on the larger cooking zones to ensure proper heat distribution. 5. Check if the child lock or lock function is activated. Refer to the "Daily use" section in the manual for instructions on how to disable the child lock or lock function. 6. Verify if there is no cookware placed on the cooking zone. Place suitable cookware on the zone for it to heat properly. 7. Ensure that the correct cookware is being used. Refer to the "Tips and advice" section in the manual for guidance on selecting suitable cookware. 8. Check if the diameter of the cookware's base is appropriate for the cooking zone. Use cookware with the correct size as specified in the "Technical data" section of the manual. 9. If none of the above steps resolve the issue, try resetting the stove by turning it off and on again after 30 seconds. If the problem persists, contact the retailer or an authorized service center for further assistance. Provide them with the information from the type plate and any error codes displayed. By following these steps, you can troubleshoot and improve the heating efficiency of your AEG HK604201CB stove.

How can I troubleshoot if the AEG HK604201CB stove is not displaying the energy efficiency symbol?

To troubleshoot if the AEG HK604201CB stove is not displaying the energy efficiency symbol, you can follow these steps: 1. Check the packaging and product labeling to ensure that the energy efficiency symbol is not present. Sometimes, the symbol may not be displayed due to packaging or labeling errors. 2. Verify if the stove is compliant with the EU 66/2014 regulations. The energy efficiency symbol may only be displayed if the stove meets the required energy efficiency standards. 3. Ensure that the stove is properly installed and connected to a power source. A faulty installation or electrical connection may prevent the energy efficiency symbol from being displayed. 4. If the stove is displaying other symbols or indicators correctly, but not the energy efficiency symbol, it could indicate a potential issue with the stove's display panel. In such cases, it is recommended to contact an authorized service center for further assistance. By following these steps, you can troubleshoot and address the issue if the AEG HK604201CB stove is not displaying the energy efficiency symbol.

What should I do if the AEG HK604201CB stove is not available in my preferred language?

If the AEG HK604201CB stove is not available in your preferred language, follow these steps: 1. Check the product packaging and labeling to see if it includes multiple language options. Some stoves may have multilingual manuals included. 2. Visit the AEG official website and navigate to the support or customer service section. Look for the product page of the AEG HK604201CB stove. 3. On the product page, search for language options or downloadable manuals. AEG may provide manuals in various languages that you can download and use. 4. If the desired language is not available on the website, contact AEG customer support directly. They can provide assistance and guidance on obtaining a manual in your preferred language. 5. Consider using online translation tools or services to translate specific sections or instructions from the available manual. This can help you understand and use the stove effectively. By following these steps, you can address the issue of the AEG HK604201CB stove not being available in your preferred language and find alternative solutions to access the necessary information.

How can I troubleshoot if the AEG HK604201CB stove is not complying with EU regulations?

To troubleshoot if the AEG HK604201CB stove is not complying with EU regulations, you can follow these steps: 1. Check if the stove is labeled with the EU energy efficiency symbol. The symbol should be displayed on the stove to indicate compliance with EU regulations. 2. Verify if the stove meets the requirements of EU 66/2014 regulations. This regulation sets energy efficiency standards for household electric cooking appliances. 3. Ensure that the stove is properly installed and connected to a power source. Faulty installation or electrical connections may affect the stove's compliance with EU regulations. 4. If the stove is not displaying the energy efficiency symbol or you suspect non-compliance, contact the retailer or AEG customer support. They can provide guidance and assistance regarding the stove's compliance and any necessary actions to address the issue. By following these steps, you can troubleshoot and address any concerns regarding the AEG HK604201CB stove's compliance with EU regulations.

Is the manual of the AEG HK604201CB available in English?

Yes, the manual of the AEG HK604201CB is available in English .

Is your question not listed? Ask your question here

No results