Advantek Networks ALN-101C manual

Advantek Networks ALN-101C
6.6 · 2
PDF manual
 · 5 pages
manualAdvantek Networks ALN-101C
This equipment has been tested and found to comply with the limits of a Class B computing
devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
If you suspect this product is causing interference, turn your computer on and off while your radio
or TV is showing interference. If the interference disappears then when you turn the computer off
and reappears then you turn the computer on, something in the computer is causing interference.
Features & Specifications
Features & Benefits:
* Supports 32-bit PCI Bus Master for high performance and low processor utilization.
* Complies to PCI 2.1 and PCI 2.2 specification
* Complies with the IEEE 802.3 CSMA/CD, 10/100Base-TX standard.
* Full duplex design to double the performance to 20Mbps/200Mbps.
* One STP connector for 100Mbps or 10Mbps network speed.
* Support Auto-negotiation function.
* Built-in FIFO buffers to eliminate external memory.
* Auto-setups IRQ and I/O address.
* Supports early interrupt on transmit to increase performance.
* Supports Novell NetWare, Windows NT/98/ME/2000/XP and other popular operating systems
* Provides diagnostic software
* Wake on LAN (If adapter supports WOL function).
* Topology : Star
* Connect to : RJ-45
Standard & Specification:
* Standard: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX
* Transmission Rate: 10Mbps or 100Mbps
* Hardware Required: IBM compatible PC with available PCI slot ( PCI 2.1 or PCI 2.2 )
* IRQ Line: Assigned by system
* I/O Address : Assigned by system
* Drivers: Novell NetWare, Windows NT/98/ME/2000/XP and other popular operating systems
* Temperature : 0 to 55 C (Operating)
* Humidity : 10% to 90% (Non-condensing)
* Power consumption : 1.8W (Max.)
If you experience any problems with the adapter, first make sure the appropriate driver is loaded,
the proper cable is connected to the adapter port and the hub complies with the adapter
specification, such as 10Mbps 10Base-TX or 100Mbps 100BaseTX, then check the LED.
Copyright 2000 by the manufacturer of this product. No part of this manual may be reproduced,
transcribed, stored in a retrieval system, translated into any language or computer language or
computer language without the prior written consent of the manufacturer. All brand and product
names are trademarks and/or registered trademarks of their respective companies.

Hardware Installation:

1. Turn off the computer and remove its cover.


View the manual for the Advantek Networks ALN-101C here, for free. This manual comes under the category Network cards/adapters and has been rated by 2 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Advantek Networks ALN-101C or do you need help? Ask your question here

Need help?

Do you have a question about the Advantek Networks ALN-101C and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Advantek Networks ALN-101C owners to provide you with a good answer.

Number of questions: 0

Advantek Networks ALN-101C specifications

Below you will find the product specifications and the manual specifications of the Advantek Networks ALN-101C.

Brand Advantek Networks
Model ALN-101C | ALN-101C
Product Network card/adapter
Language English
Filetype Usermanual (PDF)
Maximum data transfer rate 100 Mbit/s
Full duplex
Ethernet LAN
Wake-on-LAN ready
Other features
Supported data transfer rates 10/100
Dimensions (WxDxH) 120 x 16 x 28 mm
Compliance industry standards EEE 802.3, IEEE 802.3u, IEEE 802.3x Full Duplex Flow Control
Link/Act LED
Ports & interfaces
Connectivity technology Wired
Host interface PCI
Weight & dimensions
Weight 50 g
System requirements
Compatible operating systems Windows 98, 98SE, ME, 2000, XP, Vista, 7, NT3.x, NT4.x, NetWare3.x, NetWare4.x, NetWare5.x
Operational conditions
Operating temperature (T-T) 0 - 70 °C
Storage temperature (T-T) -55 - 125 °C
Operating relative humidity (H-H) 5 - 95 %
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Advantek Networks ALN-101C below.

Is your question not listed? Ask your question here

No results