Adtran NetVanta 3448 manual

Adtran NetVanta 3448
7.5 · 1
PDF manual
 · 4 pages
English
manualAdtran NetVanta 3448
Quick Start Guide, 61200821E1-13D, March 2008 1

NETVANTA 3448 ROUTER

P/N 1200821E1
4 Copyright © 2008 ADTRAN, Inc. All Rights Reserved.

GETTING STARTED

Two configuration methods are available for your NetVanta router:
Web-based graphical user interface (GUI)
AOS command line interface (CLI)
The GUI lets you configure the main unit settings and provides online guidance and explanations
for each setting. However, using the AOS CLI may be necessary for more advanced
configurations.

ACCESS THE GUI

You may access theGUI from any web browser on your network by following these steps:
1. Connect the router to your PC using the first switch port (labeled 1 on the back of the unit.
2. Set your PC to a fixed IP address of 10.10.10.2. If you cannot change the PC’s IP address,
you will need to change the unit’s IP address using the CLI. (Refer to the next two sections
for instructions.)
3. Enter the unit’s IP address in your browser address line. The default IP address is
10.10.10.1.
4. You will then be prompted for the user name and password (the default settings are admin
and password).
5. The initial GUI screen appears.

ACCESS THE CLI

Access the AOS CLI via the CONSOLE port or a Telnet session. To establish a connection to the
NetVanta router CONSOLE port, you need the following items:
VT100 terminal or PC (with VT100 terminal emulation software)
Straight-through serial cable with a DB-9 (male) connector on one end and the appropriate
interface for your terminal or PC communication port on the other end
1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE port on the rear
panel of the unit.
2. Connect the other end of the serial cable to the terminal or PC.
3. Provide power to the unit as appropriate. Refer to the NetVanta 3000 Series Hardware
Installation Guide (provided on the AOS Documentation CD) for more details.
4. Once the unit is powered up, open a VT100 terminal session using the following settings:
9600 baud, 8 data bits, no parity bits, and 1 stop bit. Press <Enter> to activate the
AOS CLI.
5. Enter enable at the > prompt.
6. Enter the enable password when prompted. The default password is password.

Manual

View the manual for the Adtran NetVanta 3448 here, for free. This manual comes under the category Routers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Adtran NetVanta 3448 or do you need help? Ask your question here

Need help?

Do you have a question about the Adtran NetVanta 3448 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Adtran NetVanta 3448 owners to provide you with a good answer.

Number of questions: 0

Adtran NetVanta 3448 specifications

Below you will find the product specifications and the manual specifications of the Adtran NetVanta 3448.

General
Brand Adtran
Model NetVanta 3448
Product Router
EAN 0607565036897
Language English
Filetype Usermanual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adtran NetVanta 3448 below.

Is your question not listed? Ask your question here

No results