View the manual for the Adonit Snap 2 here, for free. This manual comes under the category other phone accessories and has been rated by 2 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Adonit Snap 2 or do you need help? Ask your question here


The Adonit Snap 2 is a mobile phone accessory designed specifically for Apple brand smartphones, particularly the iPhone 6. Constructed with a combination of aluminum and stainless steel, this accessory is built to be durable and long-lasting. The Snap 2 is equipped with Bluetooth 4.0 technology, allowing it to easily connect wirelessly to the user's iPhone 6. This enables convenient and seamless use of the accessory without the need for any physical connections. With a battery life of approximately 7 hours, the Adonit Snap 2 provides extended usage time for users. This ensures that individuals can rely on the accessory throughout the day without concerns of it running out of power. Measuring at a depth of 4.3 millimeters, a width of 119.95 millimeters, and weighing just 9.5 grams, the Snap 2 is designed to be slim and lightweight. This makes it portable and easy to carry around in any pocket or bag. The pack contains one piece of the Adonit Snap 2, allowing users to conveniently purchase the accessory without any additional components. In summary, the Adonit Snap 2 is a mobile phone accessory specifically designed for Apple smartphones, specifically the iPhone 6. With its durable aluminum and stainless steel housing, Bluetooth 4.0 compatibility, 7-hour battery life, and slim portable design, the Snap 2 offers convenience and reliability for iPhone 6 users.
| Brand | Adonit |
| Model | Snap 2 | ADS2PP |
| Product | other phone accessory |
| EAN | 0847663022907 |
| Language | English |
| Filetype | User manual (PDF) |
| Product color | Pink |
| Device compatibility | Mobile phone/Smartphone |
| Brand compatibility | Apple |
| Compatibility | iPhone 6 |
| Housing material | Aluminium, Stainless steel |
| Bluetooth | Yes |
| Bluetooth version | 4.0 |
| Battery type | Built-in |
| Battery life | 7 h |
| Quantity per pack | 1 pc(s) |
| Depth | 4.3 mm |
| Width | 119.95 mm |
| Weight | 9.5 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adonit Snap 2 below.
The Adonit Snap 2 has a weight of 9.5 g.
The Adonit Snap 2 has a width of 119.95 mm.
The Adonit Snap 2 has a depth of 4.3 mm.
Yes, the Adonit Snap 2 is compatible with smartphones.
Yes, the Adonit Snap 2 is compatible with Apple devices.
Yes, the Adonit Snap 2 is specifically compatible with the iPhone 6.
The housing material of the Adonit Snap 2 is made of aluminium and stainless steel.
Yes, the Adonit Snap 2 has Bluetooth connectivity.
The Adonit Snap 2 supports Bluetooth version 4.0.
The battery life of the Adonit Snap 2 is 7 hours.
Each pack of the Adonit Snap 2 includes 1 piece.
To determine if the Adonit Snap 2 is fully charged, follow these steps: 1. Connect the Snap 2 to a power source using a micro USB cable. 2. Allow the Snap 2 to charge for at least 1 hour. 3. While the Snap 2 is charging, you can check the battery status by looking for a charging indicator light. This light is usually located near the charging port on the stylus. 4. If the charging indicator light is red, it means that the Snap 2 is still charging and is not yet fully charged. 5. Once the charging indicator light turns green, it indicates that the Snap 2 is fully charged and ready to use. 6. Disconnect the micro USB cable from the Snap 2 and the power source. By following these steps, you can easily determine if the Adonit Snap 2 is fully charged and ready for use.
If the Adonit Snap 2 is not charging when connected to a micro USB cable, you can try the following steps to troubleshoot the issue: 1. Check the micro USB cable: Ensure that the micro USB cable you are using is in good condition and properly connected to both the Snap 2 and the power source. Try using a different micro USB cable to see if the issue persists. 2. Check the power source: Make sure that the power source you are using is functioning properly. Try connecting the Snap 2 to a different power source, such as a different USB port or a wall charger, to see if it starts charging. 3. Clean the charging port: Sometimes, dust or debris can accumulate in the charging port of the Snap 2, preventing proper connection and charging. Gently clean the charging port using a soft, dry cloth or a small brush to remove any dirt or debris. 4. Restart the Snap 2: If the Snap 2 is still not charging, try restarting the device. Disconnect it from the micro USB cable, turn it off, and then turn it back on again. Reconnect it to the micro USB cable and check if it starts charging. If the issue persists after trying these steps, it is recommended to contact Adonit customer support for further assistance.
The Adonit Snap 2 is not compatible with Android phones. It is specifically designed for use with iPhone 6 and newer models.
To pair the Adonit Snap 2 with your iPhone, follow these steps: 1. Ensure that your iPhone is turned on and unlocked. 2. Enable Bluetooth on your iPhone by going to the Settings app and selecting "Bluetooth". 3. Press and hold the power button on the Snap 2 until the LED indicator light starts flashing. 4. On your iPhone, a list of available Bluetooth devices will appear. Look for "Adonit Snap 2" in the list and tap on it to select it. 5. Once you have selected the Adonit Snap 2, your iPhone will attempt to pair with it. Wait for the pairing process to complete. 6. Once the pairing is successful, the LED indicator light on the Snap 2 will stop flashing and remain solid. 7. You can now use the Adonit Snap 2 with your iPhone. It will function as a Bluetooth stylus and shutter remote for capturing photos. By following these steps, you can easily pair the Adonit Snap 2 with your iPhone and start using it for various functions.
If the Bluetooth shutter remote feature is not working on your Adonit Snap 2, you can try the following steps to troubleshoot the issue: 1. Ensure that the Snap 2 is properly paired with your iPhone. Check if the Snap 2 is listed as a connected Bluetooth device in your iPhone's settings. 2. Make sure that the Snap 2 has sufficient battery power. Recharge the Snap 2 using a micro USB cable and ensure that it is fully charged. 3. Verify that Bluetooth is enabled on your iPhone. Go to the Settings app, select "Bluetooth," and make sure it is turned on. 4. Restart your iPhone and the Snap 2. Turn off your iPhone, wait for a few seconds, and then turn it back on. Similarly, turn off the Snap 2 by pressing and holding the power button, and then turn it back on. 5. Try unpairing and re-pairing the Snap 2 with your iPhone. Go to the Bluetooth settings on your iPhone, find the Snap 2 in the list of devices, and select "Forget This Device." Then, follow the pairing steps mentioned earlier to reconnect the Snap 2. If the Bluetooth shutter remote feature still does not work after trying these steps, it is recommended to contact Adonit customer support for further assistance.
If the tip of the Adonit Snap 2 is not responding accurately, you can try the following steps to troubleshoot the issue: 1. Check the condition of the tip: Inspect the tip of the Snap 2 for any visible damage or wear. If the tip is damaged or worn out, it may affect its responsiveness. Consider replacing the tip if necessary. 2. Clean the tip: Sometimes, dirt or debris can accumulate on the tip, causing it to not respond accurately. Gently clean the tip using a soft, lint-free cloth or a cotton swab dampened with water. Make sure to dry the tip thoroughly before using it again. 3. Calibrate the stylus: Some devices allow you to calibrate the stylus for better accuracy. Check your iPhone's settings to see if there is an option to calibrate the stylus. Follow the on-screen instructions to calibrate the Snap 2. 4. Restart your iPhone: Sometimes, a simple restart can resolve minor software issues. Turn off your iPhone, wait for a few seconds, and then turn it back on. Reconnect the Snap 2 and check if the tip responds accurately. If the issue persists after trying these steps, it is recommended to contact Adonit customer support for further assistance.
To attach the Adonit Snap 2 to your phone using the magnetic strip, follow these steps: 1. Ensure that your phone is clean and free from any dust or debris. This will help the magnetic strip adhere properly. 2. Locate the self-adhesive magnetic strip included with the Snap 2. It is designed to be placed on the back of your phone. 3. Peel off the protective backing from the magnetic strip to expose the adhesive side. 4. Carefully align the magnetic strip with the desired position on the back of your phone. Make sure it is centered and level. 5. Press firmly on the magnetic strip to ensure it adheres securely to your phone. Apply even pressure for a few seconds to allow the adhesive to bond. 6. Once the magnetic strip is attached, you can easily snap the Adonit Snap 2 onto it. The built-in magnet on the Snap 2 will securely hold it in place. By following these steps, you can attach the Adonit Snap 2 to your phone using the magnetic strip, providing easy access to the stylus while on the move.
If the magnetic strip of the Adonit Snap 2 is not sticking properly to your phone, you can try the following steps to troubleshoot the issue: 1. Ensure that the back of your phone is clean and free from any dirt, oil, or residue. Use a soft, lint-free cloth to wipe the surface and remove any debris. 2. Check the adhesive side of the magnetic strip for any dust or particles. If there is any, gently clean it with a soft cloth or a cotton swab. 3. Make sure that the adhesive side of the magnetic strip is fully exposed. Sometimes, the protective backing may not be completely removed, preventing the strip from sticking properly. 4. Apply firm and even pressure when attaching the magnetic strip to your phone. Press down on the strip for a few seconds to ensure a strong bond between the strip and the phone's surface. 5. Allow sufficient time for the adhesive to set. Avoid using the Snap 2 immediately after attaching the magnetic strip to give the adhesive enough time to fully adhere. If the magnetic strip still does not stick properly after trying these steps, it is recommended to contact Adonit customer support for further assistance.
To determine if the Adonit Snap 2 is fully charged, follow these steps: 1. Connect the Adonit Snap 2 to a micro USB cable. 2. Plug the other end of the micro USB cable into a power source, such as a USB port on your computer or a wall adapter. 3. Allow the Adonit Snap 2 to charge for at least 1 hour. 4. While the Adonit Snap 2 is charging, you can check the battery status by looking for a charging indicator light. This light is usually located near the charging port on the stylus. 5. If the charging indicator light is red, it means that the Adonit Snap 2 is still charging and is not yet fully charged. 6. Once the charging indicator light turns green or goes off completely, it indicates that the Adonit Snap 2 is fully charged and ready to use. Remember to disconnect the micro USB cable from the Adonit Snap 2 and the power source once it is fully charged to avoid overcharging the battery. Please note that these steps are specific to the Adonit Snap 2 and may vary for other products.
If the Adonit Snap 2 is not charging when connected to a micro USB cable, you can try the following steps: 1. Ensure that the micro USB cable is securely connected to both the Adonit Snap 2 and the power source, such as a USB port on your computer or a wall adapter. 2. Check if the micro USB cable is damaged or faulty. Try using a different micro USB cable to see if the issue persists. 3. Verify that the power source is working properly. Connect another device to the same power source using the same micro USB cable to check if it charges successfully. 4. Clean the charging port on the Adonit Snap 2 and the micro USB cable connector. Use a soft, dry cloth or a cotton swab to remove any dust or debris that may be obstructing the connection. 5. Restart your device and try charging the Adonit Snap 2 again. 6. If none of the above steps resolve the issue, contact Adonit customer support for further assistance. Please note that these troubleshooting steps are specific to the Adonit Snap 2 and may vary for other products.
Yes, the Adonit Snap 2 is compatible with Android phones.
To pair the Adonit Snap 2 with your iPhone, follow these steps: 1. Ensure that your iPhone is turned on and unlocked. 2. Enable Bluetooth on your iPhone by going to the Settings app and selecting "Bluetooth". 3. Press and hold the power button on the Adonit Snap 2 until the LED indicator light starts flashing. 4. On your iPhone, a list of available Bluetooth devices will appear. Look for "Adonit Snap 2" in the list and tap on it to select it. 5. Your iPhone will now attempt to pair with the Adonit Snap 2. Wait for the pairing process to complete. 6. Once the pairing is successful, the LED indicator light on the Adonit Snap 2 will stop flashing and remain solid. 7. You can now use the Adonit Snap 2 with your iPhone. It will automatically connect to your iPhone whenever Bluetooth is enabled. Please note that these steps are specific to pairing the Adonit Snap 2 with an iPhone and may vary for other devices or operating systems.
If the Bluetooth shutter remote feature is not working on your Adonit Snap 2, you can try the following steps: 1. Ensure that the Adonit Snap 2 is fully charged. Connect it to a power source using a micro USB cable and allow it to charge for at least 1 hour. 2. Make sure that Bluetooth is enabled on your iPhone. Go to the Settings app, select "Bluetooth," and ensure that it is turned on. 3. Check if the Adonit Snap 2 is properly paired with your iPhone. Go to the Bluetooth settings on your iPhone and verify that the Adonit Snap 2 is listed as a connected device. If not, follow the pairing instructions mentioned earlier to establish the connection. 4. Restart your iPhone and the Adonit Snap 2. Turn off both devices, wait for a few seconds, and then turn them back on. 5. If the issue persists, try resetting the Bluetooth settings on your iPhone. Go to the Settings app, select "General," then "Reset," and choose "Reset Network Settings." Note that this will remove all saved Wi-Fi passwords and Bluetooth connections on your iPhone, so you will need to reconnect to them afterward. 6. If none of the above steps resolve the issue, contact Adonit customer support for further assistance. Please note that these troubleshooting steps are specific to the Adonit Snap 2 and may vary for other devices or operating systems.
If the tip of the Adonit Snap 2 is not responding accurately, you can try the following steps: 1. Check if the tip of the stylus is clean. Use a soft, lint-free cloth or a microfiber cloth to gently wipe the tip of the Adonit Snap 2. This will remove any dirt or debris that may be affecting its responsiveness. 2. Ensure that the Adonit Snap 2 is fully charged. Connect it to a power source using a micro USB cable and allow it to charge for at least 1 hour. A low battery level can sometimes cause issues with the stylus tip's accuracy. 3. Verify that the Adonit Snap 2 is properly paired with your iPhone. Go to the Bluetooth settings on your iPhone and check if the Adonit Snap 2 is listed as a connected device. If not, follow the pairing instructions mentioned earlier to establish the connection. 4. If the issue persists, try recalibrating the stylus. Open a drawing or note-taking app on your iPhone and follow the app's instructions to calibrate the stylus. This process will help optimize the accuracy of the tip. 5. If none of the above steps resolve the issue, contact Adonit customer support for further assistance. Please note that these troubleshooting steps are specific to the Adonit Snap 2 and may vary for other devices or operating systems.
To attach the Adonit Snap 2 to your phone using the magnetic strip, follow these steps: 1. Clean the back of your phone and the magnetic strip with a soft, lint-free cloth to ensure they are free from dust and debris. 2. Peel off the adhesive backing from the magnetic strip. 3. Align the magnetic strip with the desired location on the back of your phone. Make sure it is centered and positioned securely. 4. Press down firmly on the magnetic strip to ensure it adheres to the back of your phone. 5. Attach the Adonit Snap 2 to the magnetic strip by aligning the built-in magnet on the stylus with the magnetic strip on your phone. 6. The Adonit Snap 2 should securely attach to the magnetic strip, allowing you to have easy access to the stylus while on the move. Please note that the magnetic strip may not adhere properly to certain phone materials or cases. If you encounter any issues, try repositioning the magnetic strip or contact Adonit customer support for further assistance. These steps are specific to the Adonit Snap 2 and may vary for other products or magnetic attachments.
If the magnetic strip is not sticking properly to your phone, you can try the following steps: 1. Ensure that the back of your phone is clean and free from any dust, oil, or residue. Use a soft, lint-free cloth to wipe the surface of your phone. 2. Clean the adhesive side of the magnetic strip with a soft, lint-free cloth to remove any dirt or debris. 3. Make sure that the adhesive side of the magnetic strip is completely dry before attempting to stick it to your phone. 4. Check if there are any protective films or covers on the adhesive side of the magnetic strip. Remove them before attaching the strip to your phone. 5. Press down firmly on the magnetic strip after attaching it to your phone to ensure a secure bond. Apply pressure evenly across the entire surface of the strip. 6. Allow the adhesive to set and bond with your phone for a few minutes before using the Adonit Snap 2 with the magnetic strip. If the magnetic strip still does not stick properly, consider using an alternative adhesive method or contact Adonit customer support for further assistance. Please note that these steps are specific to the Adonit Snap 2 and may vary for other products or magnetic attachments.
To remove the Adonit Snap 2 from the magnetic strip, follow these steps: 1. Gently pull the Adonit Snap 2 away from the magnetic strip on your phone. 2. Apply steady and even pressure while pulling to ensure a smooth removal. 3. If the Adonit Snap 2 does not come off easily, try using your fingernail or a thin, flat object to gently pry it away from the magnetic strip. 4. Be careful not to apply too much force or bend the magnetic strip during the removal process. 5. Once the Adonit Snap 2 is detached from the magnetic strip, store it in a safe place or attach it to another surface if desired. Please note that these steps are specific to the Adonit Snap 2 and may vary for other products or magnetic attachments.
If the Adonit Snap 2 is not laying flat against your phone, you can try the following steps: 1. Check if there is any dirt, dust, or debris on the back of your phone or the magnetic strip. Use a soft, lint-free cloth to clean both surfaces. 2. Ensure that the adhesive side of the magnetic strip is free from any residue or particles. Clean it with a cloth if necessary. 3. Verify that the magnetic strip is properly aligned and centered on the back of your phone. Adjust its position if needed. 4. Press down firmly on the magnetic strip to ensure a secure attachment. Apply even pressure across the entire surface of the strip. 5. If the issue persists, check if there are any bumps or unevenness on the back of your phone. These irregularities may prevent the Adonit Snap 2 from laying flat. Consider using a phone case or a different attachment method. 6. If none of the above steps resolve the issue, contact Adonit customer support for further assistance. Please note that these troubleshooting steps are specific to the Adonit Snap 2 and may vary for other products or magnetic attachments.
Yes, the manual of the Adonit Snap 2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Adonit and is the answer not in the manual?
Question and answer
Number of questions: 3I don’t use adonit snap2 for a month afterward I push power on but the light blank and I try to charge battery but already full, so I can’t use it, pls give me solution
Yes I need help I can’t make the stylus write on iPad mini 5 or iPad 7 but it writes easily on iPhone XS. Why is this? I tried everything including removing screen protectors. Downloading latest iOS forgetting device then adding it, turning on a off everything. What can I do? When it does write I manage to get some dots and lines are broken. I can’t write at all.
Died the stylus turns off automatically