Adder View DDX USR manual

Adder View DDX USR
8.5 · 1
PDF manual
 · 53 pages
English
manualAdder View DDX USR
38
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX

USB Improvements

Version 2.0 of the DDX Switch rmware has the following improvements in USB
support over the original v1.03:
Touchscreens that advertise compatibility with windows 8 are now supported. Any
touchscreens that use proprietary drivers or do not declare windows 8 support are
not supported. Multiple touchscreens are now merged into the combined HID device
that the transmitter reports.
The Adder Free-Flow mouse reported by the CCS-PRO4 is now merged so as only
one Free-Flow mouse is reported by the transmitter. Previously, if four receivers
were connected to the CCS-PRO4, four different Free-Flow mice would be reported
meaning that no other non-emulated USB device could be connected to the receivers.
Up to ve non-emulated USB HID devices can be connected to the transmitter. The
transmitter can support up to seven USB devices, but will always report a combined
HID device for keyboard/mouse and touchscreen support, and an Audio device for
speakers and microphone support.

Using the Virtual Control Panel to adjust VGA inputs

When video inputs are fed from analog VGA sources (via a DDX-CAM-VGA) it may be
necessary to perform minor adjustments to achieve the best possible image; the Virtual
Control Panel allows you to do this.
To adjust the image from an analog VGA input
1 Display the OSD from your console.
2 Select the appropriate computer.
3 Press the following hotkey combination: CTRL + ALT + C to display the Virtual
Control Panel.
4 Then:
To change position of screen image: Use the keyboard arrow keys.
To adjust the brightness: Use the + and
keys.
To adjust the clock phase: Use the < and > keys.
To reset to the default settings: Press the R key.
5 To return to normal operation: Press the Escape (Esc) key. Any changes made will be
stored for this computer within your console and will be reapplied each time the
computer is revisited.

Choosing a computer

To choose a computer using the mouse
1 Display the OSD from your console using any of the methods shown on the previous
page.
2 Hover the mouse pointer over the required screen image. A set of popup connection
icons will be displayed:
View only - you can view a computer’s output but not alter it,
Shared access - you can view and control a computer along with other
consoles,
Exclusive - multiple users can view a computer but only one (the rst to
make connection) can control it,
or
Private - you can view and control the computer privately while other users
are locked out.
For more details, see Access permissions.
Note: If an icon is grayed out, that access method is not available.
3 Click the required connection method. The video output from the chosen computer
will be displayed full screen and you can use it as normal.
Note: When viewing the OSD, you can also click outside a computer thumbnail to return to your
previous computer (with your last access permissions if still available).
To choose a computer using hotkeys (without viewing the OSD)
Press and hold Ctrl + Alt and type the number of the required computer. The video
output from the chosen computer will be displayed full screen and you can use it as
normal.
Note: Shared access mode is always used when the computer choice is made via hotkeys.

Manual

View the manual for the Adder View DDX USR here, for free. This manual comes under the category switches and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Adder View DDX USR or do you need help? Ask your question here

Need help?

Do you have a question about the Adder and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Adder View DDX USR specifications

Below you will find the product specifications and the manual specifications of the Adder View DDX USR.

General
BrandAdder
ModelView DDX USR | DDX-USR-EURO
Productswitch
EAN5712505627204
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeReceiver
Connectivity technologyWired
Maximum transfer distance50 m
Maximum digital resolution1920 x 1200 pixels
Product colorBlack
MaterialMetal
Plug and PlayYes
LED indicatorsYes
CertificationCE, FCC
Ports & interfaces
USB 2.0 ports quantity4
Receiver
RJ-45 ports quantity (receiver)1
Receiver local video port typeDVI-D
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
AC adapter output voltage12 V
Operational conditions
Operating temperature (T-T)0 - 40 °C
Technical details
Dimensions (WxDxH)170 x 120 x 31 mm
Weight600 g
Packaging content
AC adapter includedYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adder View DDX USR below.

What is the weight of the Adder View DDX USR?

The Adder View DDX USR has a weight of 600 g.

What certifications does the Adder View DDX USR have?

The Adder View DDX USR has the following certifications: CE, FCC.

Is the manual of the Adder View DDX USR available in English?

Yes, the manual of the Adder View DDX USR is available in English .

Is your question not listed? Ask your question here

No results