Adder View DDX USR manual

Adder View DDX USR
8.5 · 1
PDF manual
 · 53 pages
English
manualAdder View DDX USR
36
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX

RESETTING AND RECOVERING

There may be rare occasions when the main switch or a module needs to be given a hard reset. The DDX switch

and DDX-USR module both have concealed reset buttons for this purpose. You need to use a narrow implement

(e.g. a straightened-out paper clip) to press-and-hold the recessed reset button on the front panel:

DDX switch > Boot into recovery image

This procedure may be necessary if an attempted rmware upgrade has failed. The

switch will load the factory default conguration, requiring you to log-in using the factory

default username/ password and a freshly determined IP address (see Accessing DDX

Matrix). You will be required to accept a new temporary SSL certicate when accessing

the web interface. Note: All conguration data (e.g. users, consoles, computers, networking, etc.)

will be retained.

1 Press-and-hold the recessed reset button for ten seconds until the STS (Status)

indicator begins to ash slowly.

2 Release the reset button. The STS indicator will go out and the switch will boot itself

using the recovery image. The STS indicator will now begin to ash again to indicate

that it is running from the recovery image (a red banner will also be shown at the top

of the DDX Matrix screen).

3 When you are sure of operating conditions, such as having good power stability,

proceed once again with the rmware upgrade.

DDX switch > Reset

This procedure may be necessary if the switch has become unresponsive. Note: All

conguration data (e.g. users, consoles, computers, networking, etc.) will be retained.

1 Press-and-release the recessed reset button. The switch will reboot.

DDX switch

DDX-USR module

DDX-USR module > Boot into recovery mode

This procedure may be necessary if an attempted rmware upgrade has failed. For such

a situation the DDX-USR module always retains a recovery image that will return the unit

to a working condition, prior to reattempting a rmware upgrade.

1 Press-and-hold the recessed reset button for ten seconds until the PWR indicator

begins to ash quickly.

2 Release the reset button.

3 When you are sure of operating conditions, such as having good power stability,

proceed once again with the rmware upgrade.

DDX-USR module > Reset

This procedure may be necessary if a DDX-USR has become unresponsive.

1 Press-and-release the recessed reset button. The DDX-USR module will reboot.

Recovering an unresponsive transmitter or receiver

If a rmware upgrade to a transmitter or receiver has failed, the unit may become

unresponsive. If so, please follow the advice provided in other sections of this guide:

Recovering a transmitter

Recovering a receiver

Manual

View the manual for the Adder View DDX USR here, for free. This manual comes under the category switches and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Adder View DDX USR or do you need help? Ask your question here

Need help?

Do you have a question about the Adder and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Adder View DDX USR specifications

Below you will find the product specifications and the manual specifications of the Adder View DDX USR.

General
BrandAdder
ModelView DDX USR | DDX-USR-EURO
Productswitch
EAN5712505627204
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeReceiver
Connectivity technologyWired
Maximum transfer distance50 m
Maximum digital resolution1920 x 1200 pixels
Product colorBlack
MaterialMetal
Plug and PlayYes
LED indicatorsYes
CertificationCE, FCC
Ports & interfaces
USB 2.0 ports quantity4
Receiver
RJ-45 ports quantity (receiver)1
Receiver local video port typeDVI-D
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
AC adapter output voltage12 V
Operational conditions
Operating temperature (T-T)0 - 40 °C
Technical details
Dimensions (WxDxH)170 x 120 x 31 mm
Weight600 g
Packaging content
AC adapter includedYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adder View DDX USR below.

What is the weight of the Adder View DDX USR?

The Adder View DDX USR has a weight of 600 g.

What certifications does the Adder View DDX USR have?

The Adder View DDX USR has the following certifications: CE, FCC.

Is the manual of the Adder View DDX USR available in English?

Yes, the manual of the Adder View DDX USR is available in English .

Is your question not listed? Ask your question here

No results