Adder View DDX USR manual

Adder View DDX USR
8.5 · 1
PDF manual
 · 53 pages
English
manualAdder View DDX USR
INSTALLATION
2
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX

Introduction

WELCOME

Thank you for choosing the AdderView DDX system. This adaptive system makes
sharing numerous host computers among multiple users straightforward and exible.
Every computer is linked, via its USB and video ports, to a compact DDX-CAM
module while each set of peripherals are connected to a DDX-USR module (to form
Consoles).
The various computers and consoles are then linked, via CAT6a or CAT7 cable
with S/FTP, S/STP or PiMF shielding (see Appendix 1 for details), to a central
DDX switch. Each user can then, subject to the privileges granted by the admin, gain
quick access to any of the required computers.
If required, computers and consoles can be individually connected
in order to take advantage of the DDX extender properties
without the switching.
An integral part of DDX switches is the DDX Matrix, a browser-based conguration
and management tool that allows one or more remote admin user(s) to monitor
and maintain all aspects of operation.

Cable type and distance rules

Cable screening/shielding is required. The best cable shielding specications for use
with the DDX system are: S/FTP, S/STP or PiMF.
Extension distances up to 50m are supported with single uninterrupted runs of
recommended cable (shielded CAT6a or CAT7 cable).
CAT5 or CAT5e cables must NOT be used with this product.
Overall cable runs must be reduced by 5m for each additional cable coupling.
All patch cables should be as short as possible and should be no longer than 2m.
It is recommended that Adder shielded CAT7 cables are used for maximum
performance.
IMPORTANT: Always ensure
you are using shielded cables.

Manual

View the manual for the Adder View DDX USR here, for free. This manual comes under the category switches and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Adder View DDX USR or do you need help? Ask your question here

Need help?

Do you have a question about the Adder and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Adder View DDX USR specifications

Below you will find the product specifications and the manual specifications of the Adder View DDX USR.

General
BrandAdder
ModelView DDX USR | DDX-USR-EURO
Productswitch
EAN5712505627204
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeReceiver
Connectivity technologyWired
Maximum transfer distance50 m
Maximum digital resolution1920 x 1200 pixels
Product colorBlack
MaterialMetal
Plug and PlayYes
LED indicatorsYes
CertificationCE, FCC
Ports & interfaces
USB 2.0 ports quantity4
Receiver
RJ-45 ports quantity (receiver)1
Receiver local video port typeDVI-D
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
AC adapter output voltage12 V
Operational conditions
Operating temperature (T-T)0 - 40 °C
Technical details
Dimensions (WxDxH)170 x 120 x 31 mm
Weight600 g
Packaging content
AC adapter includedYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adder View DDX USR below.

What is the weight of the Adder View DDX USR?

The Adder View DDX USR has a weight of 600 g.

What certifications does the Adder View DDX USR have?

The Adder View DDX USR has the following certifications: CE, FCC.

Is the manual of the Adder View DDX USR available in English?

Yes, the manual of the Adder View DDX USR is available in English .

Is your question not listed? Ask your question here

No results