Adder View DDX USR manual

Adder View DDX USR
8.5 · 1
PDF manual
 · 53 pages
English
manualAdder View DDX USR
15
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX

Console connections: Power

There is no on/off switch on the DDX-USR module, so operation begins as soon
as power is applied. The supplied power adapter uses a locking-type plug to help
prevent accidental disconnections; please follow the instructions given right whenever
disconnecting a power adapter.
To connect the power adapter
1 Attach the output plug of the supplied power adapter to
the power input socket on the rear panel of the DDX-USR
module.
2 Connect the IEC connector of the supplied country-specic power cord to the socket
of the power adapter.
3 Connect the power cord to a nearby main supply socket.
IMPORTANT: Please read and adhere to the electrical safety information
given within the Safety information section of this guide. In particular, do not
use an unearthed power socket or extension cable.
Note: Both the modules and the power supplies generate heat when in operation and will
become warm to the touch. Do not enclose them or place them in locations where air cannot
circulate to cool the equipment. Do not operate the equipment in ambient temperatures
exceeding 40 degrees Centigrade. Do not place the products in contact with equipment whose
surface temperature exceeds 40 degrees Centigrade.
From the
power adapter
To disconnect the power adapter
1 Isolate the power adapter from the mains supply.
2 Grasp the outer body of the power adapter plug
where it connects with the module.
3 Gently pull the body of the outer plug away from
the module. As the body of the plug slides back,
it will release from the socket and you can fully
withdraw the whole plug.
Gently pull back the plug outer
body to release the lock

Manual

View the manual for the Adder View DDX USR here, for free. This manual comes under the category switches and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Adder View DDX USR or do you need help? Ask your question here

Need help?

Do you have a question about the Adder and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Adder View DDX USR specifications

Below you will find the product specifications and the manual specifications of the Adder View DDX USR.

General
BrandAdder
ModelView DDX USR | DDX-USR-EURO
Productswitch
EAN5712505627204
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeReceiver
Connectivity technologyWired
Maximum transfer distance50 m
Maximum digital resolution1920 x 1200 pixels
Product colorBlack
MaterialMetal
Plug and PlayYes
LED indicatorsYes
CertificationCE, FCC
Ports & interfaces
USB 2.0 ports quantity4
Receiver
RJ-45 ports quantity (receiver)1
Receiver local video port typeDVI-D
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
AC adapter output voltage12 V
Operational conditions
Operating temperature (T-T)0 - 40 °C
Technical details
Dimensions (WxDxH)170 x 120 x 31 mm
Weight600 g
Packaging content
AC adapter includedYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adder View DDX USR below.

What is the weight of the Adder View DDX USR?

The Adder View DDX USR has a weight of 600 g.

What certifications does the Adder View DDX USR have?

The Adder View DDX USR has the following certifications: CE, FCC.

Is the manual of the Adder View DDX USR available in English?

Yes, the manual of the Adder View DDX USR is available in English .

Is your question not listed? Ask your question here

No results