Adder Link X-DVI PRO manual

Adder Link X-DVI PRO
7.1 · 1
PDF manual
 · 16 pages
English
manualAdder Link X-DVI PRO
5
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION

Installation

CONNECTIONS

Installation of the X-DVIPRO and X-DVIPRO-MS2 modules is straightforward and
requiresminimalcongurationinmostcases.
• Connections at the local module
• Connections at the remote module
Note: After all connections are made, power up the monitor and the REMOTE module rst
(followed by the LOCAL module, if using the X-DVIPRO-MS2 variant) and then switch on the
computer.

Mounting the modules – desk or rack

The X-DVIPRO and X-DVIPRO-MS2 modules can be situated on a desk or alternatively,
for larger installations, mounted within an optional rack mount chassis.
Desk mount
Apply the supplied self-adhesive rubber feet to
the underside of the module.
Rack mount
1 Place the rack securing plate (available as a separate kit) onto the front of the module
and secure it with the two countersunk screws.
2 Orient the X-DVIPRO (or X-DVIPRO-MS2) module on its side so that its labeled face
is the correct way up.
3 Slide the module into the required rack position. The rectangular cut-out in the front
upper lip of the rack allows the two screws on the module’s upper edge to slide
through.
4 Therackmountchassishasaseriesofholesinitsoorthatarespacedto
accommodate the two screws on the module’s lower edge. Ensure that the screws
correctly locate into the two holes of the chosen slot. The rack securing plate
onthemoduleshouldnowbeushwiththefrontoftherackmount
chassis.
5 Use the third (pan-head) screw, in the top hole of the rack
securing plate to fasten the module to the rack.
HT

Manual

View the manual for the Adder Link X-DVI PRO here, for free. This manual comes under the category switches and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Adder Link X-DVI PRO or do you need help? Ask your question here

Need help?

Do you have a question about the Adder and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Adder Link X-DVI PRO specifications

Below you will find the product specifications and the manual specifications of the Adder Link X-DVI PRO.

General
BrandAdder
ModelLink X-DVI PRO | X-DVIPRO-IEC
Productswitch
EAN8716065273762
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeTransmitter & receiver
Connectivity technologyWired
Maximum transfer distance50 m
Maximum digital resolution1920 x 1200 pixels
Product colorBlack
MaterialMetal
CertificationCE, FCC
Cable types supportedCat5e, Cat6a, Cat7
Transmitter
Transmitter video port typeDVI-D
Receiver
Receiver local video port typeDVI-D
Receiver local keyboard/mouse port typeUSB
Weight & dimensions
Transmitter width120 mm
Receiver width120 mm
Transmitter depth75 mm
Receiver depth75 mm
Transmitter height26 mm
Receiver height26 mm
Transmitter weight320 g
Receiver weight320 g
Operational conditions
Operating temperature (T-T)0 - 40 °C
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Input current0.4 A
AC adapter output voltage5 V
Ports & interfaces
USB 2.0 ports quantity5
Logistics data
Harmonized System (HS) code84733080
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adder Link X-DVI PRO below.

What certifications does the Adder Link X-DVI PRO have?

The Adder Link X-DVI PRO has the following certifications: CE, FCC.

Is the manual of the Adder Link X-DVI PRO available in English?

Yes, the manual of the Adder Link X-DVI PRO is available in English .

Is your question not listed? Ask your question here

No results