Adder Link X-DVI PRO manual

Adder Link X-DVI PRO
7.1 · 1
PDF manual
 · 16 pages
English
manualAdder Link X-DVI PRO
14
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION

RADIO FREQUENCY ENERGY

A Category 6a (or better) twisted pair cable must be used to connect the units in order
to maintain compliance with radio frequency energy emission regulations and ensure a
suitably high level of immunity to electromagnetic disturbances.
All other interface cables used with this equipment must be shielded in order to maintain
compliance with radio frequency energy emission regulations and ensure a suitably high
level of immunity to electromagnetic disturbances.

European EMC directive 2004/108/EC

This equipment has been tested and found to comply with the limits for a class A
computingdeviceinaccordancewiththespecicationsintheEuropeanstandard
EN55022. These limits are designed to provide reasonable protection against harmful
interference. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions may cause harmful
interference to radio or television reception. However, there is no guarantee that
harmful interference will not occur in a particular installation. If this equipment does
cause interference to radio or television reception, which can be determined by turning
the equipment on and off, the user is encouraged to correct the interference with one
or more of the following measures: (a) Reorient or relocate the receiving antenna.
(b) Increase the separation between the equipment and the receiver. (c) Connect
the equipment to an outlet on a circuit different from that to which the receiver is
connected. (d) Consult the supplier or an experienced radio/TV technician for help.

FCC Compliance Statement (United States)

This equipment generates, uses and can radiate radio frequency energy and if not
installed and used properly, that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio communication. It has been tested and
found to comply with the limits for a class A computing device in accordance with
thespecicationsinSubpartJofpart15ofFCCrules,whicharedesignedtoprovide
reasonable protection against such interference when the equipment is operated in a
commercial environment. Operation of this equipment in a residential area may cause
interference, in which case the user at his own expense will be required to take whatever
measuresmaybenecessarytocorrecttheinterference.Changesormodicationsnot
expressly approved by the manufacturer could void the user’s authority to operate the
equipment.

Canadian Department of Communications RFI statement

This equipment does not exceed the class A limits for radio noise emissions from digital
apparatus set out in the radio interference regulations of the Canadian Department of
Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le règlement sur le
brouillage radioélectriques publié par le ministère des Communications du Canada.

WARRANTY

Adder Technology Ltd warrants that this product shall be free from defects in
workmanship and materials for a period of two years from the date of original purchase.
If the product should fail to operate correctly in normal use during the warranty period,
Adder will replace or repair it free of charge. No liability can be accepted for damage due
to misuse or circumstances outside Adder’s control. Also Adder will not be responsible
for any loss, damage or injury arising directly or indirectly from the use of this product.
Adder’s total liability under the terms of this warranty shall in all circumstances be
limited to the replacement value of this product.
Ifanydifcultyisexperiencedintheinstallationoruseofthisproductthatyouare
unable to resolve, please contact your supplier.

SAFETY INFORMATION

• For use in dry, oil free indoor environments only.
• Do not use to link between buildings.
• Ensure that the twisted pair interconnect cable is installed in compliance with all
applicable wiring regulations.
• DonotconnecttheCATxlinkinterface(RJ45styleconnector)toanyother
equipment, particularly network or telecommunications equipment.
• Warning – the power adapter contains live parts.
• No user serviceable parts are contained within the power adapter - do not dismantle.
• Plug the power adapter into an earthed socket outlet close to the unit that it is
powering.
• Replace the power adapter with a manufacturer approved type only.
• Do not use the power adapter if the power adapter case becomes damaged, cracked
or broken or if you suspect that it is not operating properly.
• If you use a power extension cord with the units, make sure the total ampere rating of
the devices plugged into the extension cord do not exceed the cord’s ampere rating.
Also, make sure that the total ampere rating of all the devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.
• Do not attempt to service the units yourself.
• The units and power supplies can get warm in operation – do not situate them in an
enclosed space without any ventilation.
• The units do not provide ground isolation and should not be used for any applications
that require ground isolation or galvanic isolation.

Manual

View the manual for the Adder Link X-DVI PRO here, for free. This manual comes under the category switches and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Adder Link X-DVI PRO or do you need help? Ask your question here

Need help?

Do you have a question about the Adder and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Adder Link X-DVI PRO specifications

Below you will find the product specifications and the manual specifications of the Adder Link X-DVI PRO.

General
BrandAdder
ModelLink X-DVI PRO | X-DVIPRO-IEC
Productswitch
EAN8716065273762
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeTransmitter & receiver
Connectivity technologyWired
Maximum transfer distance50 m
Maximum digital resolution1920 x 1200 pixels
Product colorBlack
MaterialMetal
CertificationCE, FCC
Cable types supportedCat5e, Cat6a, Cat7
Transmitter
Transmitter video port typeDVI-D
Receiver
Receiver local video port typeDVI-D
Receiver local keyboard/mouse port typeUSB
Weight & dimensions
Transmitter width120 mm
Receiver width120 mm
Transmitter depth75 mm
Receiver depth75 mm
Transmitter height26 mm
Receiver height26 mm
Transmitter weight320 g
Receiver weight320 g
Operational conditions
Operating temperature (T-T)0 - 40 °C
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Input current0.4 A
AC adapter output voltage5 V
Ports & interfaces
USB 2.0 ports quantity5
Logistics data
Harmonized System (HS) code84733080
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Adder Link X-DVI PRO below.

What certifications does the Adder Link X-DVI PRO have?

The Adder Link X-DVI PRO has the following certifications: CE, FCC.

Is the manual of the Adder Link X-DVI PRO available in English?

Yes, the manual of the Adder Link X-DVI PRO is available in English .

Is your question not listed? Ask your question here

No results