ACTi Q22 manual

ACTi Q22
6.5 · 1
PDF manual
 · 37 pages
English
manualACTi Q22
www.acti.com
Hardware Manual

31

Accessing the Camera

Configure the IP Addresses

In order to be able to communicate with the camera from your PC, both the camera and the PC
have to be within the same network segment. In most cases, it means that they both should have
very similar IP addresses, where only the last number of the IP address is different from each
other. There are 2 different approaches to IP Address management in Local Area Networks by
DHCP Server or Manually.
Using DHCP Server to Assign IP Addresses
If you have connected the computer and the camera into the network that has a DHCP server
running, then you do not need to configure the IP addresses at all both the camera and the PC
would request a unique IP address from DHCP server automatically. In such case, the camera
will immediately be ready for the access from the PC. The user, however, might not know the IP
address of the camera yet. It is necessary to know the IP address of the camera in other to be
able to access it by using a Web browser.
The quickest way to discover the cameras in the network is to use the simplest network
search, built in the Windows system just by pressing the “Network” icon, all the cameras of the
local area network will be discovered by Windows thanks to the UPnP function support of our
cameras.
In the example below, we successfully found the camera that we had just connected to the
network.

Manual

View the manual for the ACTi Q22 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 6.5. This manual is available in the following languages: English. Do you have a question about the ACTi Q22 or do you need help? Ask your question here

Need help?

Do you have a question about the ACTi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

ACTi Q22 specifications

Below you will find the product specifications and the manual specifications of the ACTi Q22.

General
BrandACTi
ModelQ22 | Q22
Productsecurity camera
EAN0888034008601, 4710751962279
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Performance
PTZ controlNo
Wide Dynamic Range (WDR)Yes
Connectivity technologyWired
TypeIP security camera
Placement supportedOutdoor
CertificationCE, FCC, EN50155, UL
Video
Total megapixels2.38 MP
Supported video modes1080p
Frame rate30 fps
Maximum resolution1920 x 1080 pixels
Number of TV lines (horizontal)1100
Video compression formatsH.264, M-JPEG
Supported graphics resolutions320 x 240,640 x 480 (VGA),800 x 600 (SVGA),1280 x 720 (HD 720),1920 x 1080 (HD 1080)
Video streamingYes
Bit rate controlConstant Bit Rate (CBR), Variable Bit Rate (VBR)
Bit rate28 Kbps - 6 Mbps
Image quality adjustmentBrightness, Contrast, Sharpness
Automatic gain controlYes
Noise reductionYes
3D NR (Noise Reduction)Yes
Privacy maskingYes
Text caption overlayYes
Flip & mirrorYes
Lens system
Maximum aperture number2.2
Fixed focal length2.55 mm
Fixed focusYes
Number of lenses1
Audio
Built-in microphoneYes
Signal-to-Noise Ratio (SNR)52 dB
Audio formats supportedG.711, PCM
Sample rate8 kHz
Audio detectionYes
Design
WeatherproofYes
International Protection (IP) codeIP68
Protection featuresVibration proof
Form factorBox
LED indicatorsYes
Product colorBlack
Mounting type-
Storage
Card reader integratedYes
Built-in HDD-
Compatible memory cardsMicroSDHC, MicroSDXC
Ports & interfaces
Ethernet LAN (RJ-45) ports1
DC-in jackYes
Terminal block portYes
RS-232 ports1
Image sensor
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.8 "
Number of effective pixels (H x V)1944 x 1224 pixels
Camera
Minimum illumination0.1 lx
Camera shutter typeElectronic
Camera shutter speed1/5 - 1/32000 s
110.3 °
White balanceAuto, Manual
Network
Streaming methodMulticast
Supported network protocolsTCP, UDP, HTTP, HTTPs, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Networking standardsIEEE 802.3af
Security
IP address filteringYes
HTTPS encryptionYes
Password protectionYes
Password protection typeUser
Video motion detectionYes
Alert notification typeE-mail, Snapshot alert message
Power
Power source typeDC, PoE
Power consumption (typical)3.6 W
Power consumption (Power over Ethernet (PoE))4.32 W
Weight & dimensions
Weight465 g
Width75 mm
Depth100.33 mm
Height25.5 mm
Operational conditions
Operating temperature (T-T)-20 - 50 °C
Storage temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)10 - 85 %
Packaging content
Number of cameras1
Night vision
Night vision-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ACTi Q22 below.

What is the weight of the ACTi Q22?

The ACTi Q22 has a weight of 465 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What certifications does the ACTi Q22 have?

The ACTi Q22 has the following certifications: CE, FCC, EN50155, UL.

What is the height of the ACTi Q22?

The ACTi Q22 has a height of 25.5 mm.

What is the width of the ACTi Q22?

The ACTi Q22 has a width of 75 mm.

What is the depth of the ACTi Q22?

The ACTi Q22 has a depth of 100.33 mm.

Is the manual of the ACTi Q22 available in English?

Yes, the manual of the ACTi Q22 is available in English .

Is your question not listed? Ask your question here

No results