View the manual for the ACTi Q112 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the ACTi Q112 or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the ACTi Q112.
| Brand | ACTi |
| Model | Q112 | Q112 |
| Product | security camera |
| EAN | 0888034007697, 4710751961364 |
| Language | English |
| Filetype | User manual (PDF), Product Brochure (PDF), Datasheet (PDF) |
| Type | IP security camera |
| Placement supported | Indoor |
| People counting function | Yes |
| Wide Dynamic Range (WDR) | Yes |
| Remote viewing | Yes |
| Infrared (IR) cut-off filter | Yes |
| Plug and Play | Yes |
| Connectivity technology | Wired |
| Certification | CE, FCC, EN50155 |
| Form factor | Covert |
| Product color | Black |
| Mounting type | Wall |
| Protection features | Vibration proof |
| Maximum resolution | 2592 x 1944 pixels |
| Total megapixels | 5 MP |
| Video compression formats | H.264, M-JPEG |
| Supported graphics resolutions | 320 x 240,640 x 480 (VGA),800 x 600 (SVGA),1280 x 720 (HD 720),1920 x 1080 (HD 1080),2048 x 1536 (QXGA),2592 x 1944 |
| Supported video modes | 1080p |
| Noise reduction | Yes |
| Gain control type | Auto |
| Automatic gain control | Yes |
| Frame rate | 30 fps |
| Full HD | Yes |
| Image quality adjustment | Brightness, Contrast, Sharpness |
| Video streaming | Yes |
| Flip & mirror | Yes |
| Privacy masking | Yes |
| Time stamp overlay | Yes |
| Text caption overlay | Yes |
| Bit rate control | Constant Bit Rate (CBR)/Variable Bit Rate (VBR) |
| Bit rate | 28 Kbps - 6 Mbps |
| Digital Wide Dynamic Range (DWDR) | Yes |
| Region of Interest (ROI) encoding | Yes |
| Number of TV lines (horizontal) | 1350 |
| Minimum illumination | 0.1 lx |
| 70.2 ° | |
| 51.4 ° | |
| White balance | Auto, Manual |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Optical sensor size | 1/3.2 " |
| Number of effective pixels (H x V) | 2592 x 1944 pixels |
| Number of lenses | 1 |
| Maximum aperture number | 2.5 |
| Fixed focus | Yes |
| Fixed focal length | 3.7 mm |
| Password protection | Yes |
| Password protection type | User |
| Video motion detection | Yes |
| Active tampering alarm | Yes |
| IP address filtering | Yes |
| Security algorithms | 802.1x RADIUS |
| HTTPS encryption | Yes |
| Alert notification type | E-mail, Snapshot alert message, Text alert message |
| Privacy protection | Yes |
| Intelligent Video Surveillance (IVS) system features | Abandoned object, Crossing line, Face detection, Intrusion, Missing object, People counting, Scene change |
| Anti-flicker | Yes |
| Heartbeat | Yes |
| Mirror | Yes |
| Digital watermark | Yes |
| Card reader integrated | Yes |
| Compatible memory cards | MicroSDHC, MicroSDXC |
| Built-in HDD | No |
| Night vision | No |
| Ethernet LAN | Yes |
| Wi-Fi | No |
| Bluetooth | No |
| Ethernet interface type | Fast Ethernet |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.1x, IEEE 802.3af |
| Supported network protocols | IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X |
| Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Terminal block port | Yes |
| Audio input channels | 1 channels |
| Audio output channels | 1 channels |
| Audio system | 2-way |
| Sample rate | 8 kHz |
| Voice codecs | G.711 |
| Diameter | 26 mm |
| Length | 55.52 mm |
| Power source type | DC, PoE |
| DC output voltage | 12 |
| Power consumption (Power over Ethernet (PoE)) | 4.32 W |
| Web-based management | Yes |
| Web browser | Yes |
| Firmware upgradeable | Yes |
| Reset button | Yes |
| Remotely operated | Yes |
| Behavior analysis | Intrusion detection, Line crossing detection, Object removal detection, Unattended baggage detection |
| Operating temperature (T-T) | -30 - 60 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Number of cameras | 1 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ACTi Q112 below.
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
MP stands for MegaPixels.
The ACTi Q112 has the following certifications: CE, FCC, EN50155.
Yes, the manual of the ACTi Q112 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the ACTi and is the answer not in the manual?
Question and answer
Number of questions: 0