ACTi E816 manual

ACTi E816
7.9 · 1
PDF manual
 · 123 pages
English
manualACTi E816

www.acti.com

Firmware Users Manual V6.09.45

101

How is it triggered?
Events may be triggered by one of the several sources.
Scheduler: You can trigger an event based on the set schedule. For example, in the example
below, the schedule is set for an alarm to sound at 4:00, and will sound once every 5 minutes
within the next 10 minutes.
DIs: For selected models only, the IP device may be triggered by Digital Input. Select the digital
input and make sure to configure it on the Event Configuration page
Motion: You may trigger the event if one or many Motion Detection regions encounter a motion
trigger. Trigger from any of them will initiate the event. The duration of event will be the same as
the MD trigger length, or the Trigger interval time, defined in the Motion Detection section on
Video Adjust page. In the example below, Motion Detection region 1 is used as the event trigger.
You may also ask the event to be repeatedly triggered during this scheduled time. The interval is
determined in minutes. You may use this with email / FTP upload to take snapshots at regular
intervals.
Sound Detection: The event may be triggered when sound is detected. This feature is available
on cameras with Audio in capabilites only. The Sound Detection must be configured first to use
this feature.
Switch to Night mode: This is available to selected models only. When camera changes
between day and night modes, the embedded event handler will notice this change, and may act
upon this information.
Potential uses include changing the motion detection profile to another set of Event MD
parameters. By having two sets of parameters each optimized for day and night, this provide
better overall accuracy in both day and night conditions. Some night time only MD regions may
also be activated this way. The event period will end when the camera returns to day mode,
which will then reset the camera to the original settings.

Manual

View the manual for the ACTi E816 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the ACTi E816 or do you need help? Ask your question here

Need help?

Do you have a question about the ACTi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

ACTi E816 specifications

Below you will find the product specifications and the manual specifications of the ACTi E816.

General
BrandACTi
ModelE816 | E816
Productsecurity camera
EAN0888034006188, 4718201799840
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Performance
TypeIP security camera
Placement supportedOutdoor
PTZ controlYes
PTZ modes8 Tour, Preset point
PTZ protocolsPelco-P/D
Preset pointsYes
Tour recordingYes
People counting functionYes
Wide Dynamic Range (WDR)Yes
Day/night modeYes
Remote viewingYes
Infrared (IR) cut-off filterYes
Plug and PlayYes
Connectivity technologyWired
CertificationCE, FCC, IP67, IK10, NEMA 4X, UL
Design
Form factorDome
Product colorBlack, Transparent, White
Mounting typeCeiling/Wall/Pole
Protection featuresWaterproof
International Protection (IP) codeIP67
WeatherproofYes
IK codeIK10
Video
Maximum resolution3648 x 2736 pixels
Total megapixels10 MP
Video compression formatsH.264, M-JPEG
Supported graphics resolutions320 x 240,640 x 480 (VGA),800 x 600 (SVGA),1280 x 720 (HD 720),1920 x 1080 (HD 1080),2048 x 1536 (QXGA),2592 x 1944,3648 x 2736
Supported video modes1080p
Noise reductionYes
3D NR (Noise Reduction)Yes
Gain control typeAuto
Noise reduction technologyUltra 2D noise reduction, Ultra 3D noise reduction
Automatic gain controlYes
Frame rate30 fps
Full HDYes
Image quality adjustmentBrightness, Contrast, Sharpness
Video streamingYes
Flip & mirrorYes
Privacy maskingYes
Time stamp overlayYes
Text caption overlayYes
Bit rate controlConstant Bit Rate (CBR)/Variable Bit Rate (VBR)
Bit rate28 Kbps - 6 Mbps
Digital Wide Dynamic Range (DWDR)Yes
Region of Interest (ROI) encodingYes
Number of TV lines (horizontal)1450
Camera
Minimum illumination0.1 lx
90.6 °
68.7 °
Tilt angle range5 - 175 °
Pan range0 - 350 °
Angle of rotation350 °
Camera shutter speed1/5 - 1/10000 s
White balanceAuto, Manual
Adjustment shutter speedAuto/Manual
Image sensor
Number of sensors1
Optical sensor size1/2.3 "
Progressive scanYes
Number of effective pixels (H x V)3856 x 2764 pixels
Sensor typeCMOS
Lens system
Number of lenses-
Zoom capabilityYes
Optical zoom4.3 x
Maximum aperture number4
Auto focusYes
Minimum aperture number1.4
Focal length range3.1 - 13.3 mm
Security
Password protectionYes
Password protection typeUser
Video motion detectionYes
Active tampering alarmYes
IP address filteringYes
Security algorithms802.1x RADIUS
HTTPS encryptionYes
Alert notification typeE-mail, Snapshot alert message, Text alert message
Privacy protectionYes
Intelligent Video Surveillance (IVS) system featuresAbandoned object, Crossing line, Face detection, Intrusion, Missing object, People counting, Scene change
Anti-flickerYes
HeartbeatYes
MirrorYes
Digital watermarkYes
Storage
Card reader integratedYes
Compatible memory cardsMicroSDHC, MicroSDXC
Built-in HDDNo
Night vision
Night visionYes
Night vision distance30 m
LED typeIR
Number of illumination LEDs10
Infra-red wavelength850 nm
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.1x, IEEE 802.3af
Supported network protocolsIPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X
Streaming methodMulticast
E-mailYes
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Terminal block portYes
Audio
Audio input channels1 channels
Audio output channels1 channels
Sample rate8 kHz
Audio system2-way
Voice codecsG.711
Weight & dimensions
Height131 mm
Diameter152.8 mm
Weight1400 g
Power
Power source typePoE
Power consumption (Power over Ethernet (PoE))7.28 W
Management features
Web-based managementYes
Web browserYes
Firmware upgradeableYes
Reset buttonYes
Remotely operatedYes
Behavior analysisIntrusion detection, Line crossing detection, Object removal detection, Unattended baggage detection
Operational conditions
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)10 - 85 %
Packaging content
Number of cameras1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ACTi E816 below.

What is the weight of the ACTi E816?

The ACTi E816 has a weight of 1400 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What certifications does the ACTi E816 have?

The ACTi E816 has the following certifications: CE, FCC, IP67, IK10, NEMA 4X, UL.

What is the height of the ACTi E816?

The ACTi E816 has a height of 131 mm.

Is the manual of the ACTi E816 available in English?

Yes, the manual of the ACTi E816 is available in English .

Is your question not listed? Ask your question here

No results