ACS ACR38U-N1 manual

ACS ACR38U-N1
6.7 · 1
PDF manual
 · 79 pages
English
manualACS ACR38U-N1
ACR38x (CCID) Reference Manual info@acs.com.hk
Version 6.05

www.acs.com.hk

Page 6 of 79

3.0. Smart Card Support

3.1. MCU Cards

The ACR38x (CCID) is a PC/SC compliant smart card reader that supports ISO 7816 Class A, B and
C (5 V, 3 V, and 1.8 V) smart cards. It also works with MCU cards following either the T=0 and T=1
protocol.
The card ATR indicates the specific operation mode (TA2 present; bit b5 of TA2 must be 0) and when
that particular mode is not supported by the ACR38x (CCID), the reader will reset the card to a
negotiable mode. If the card cannot be set to negotiable mode, the reader will then reject the card.
When the card ATR indicates the negotiable mode (TA2 not present) and communication parameters
other than the default parameters, the ACR38x (CCID) will execute the PPS and try to use the
communication parameters that the card suggested in its ATR. If the card does not accept the PPS,
the reader will use the default parameters (F=372, D=1).
Note: For the meaning of the aforementioned parameters, please refer to ISO 7816-3.
3.2. Memory-based Smart Cards
The ACR38x (CCID) works with several memory-based smart cards, such as:
Cards following the I2C bus protocol (free memory cards) with maximum 128 bytes page with
capability, including:
o Atmel®: AT24C01/02/04/08/16/32/64/128/256/512/1024
o SGS-Thomson: ST14C02C, ST14C04C
o Gemplus: GFM1K, GFM2K, GFM4K, GFM8K
Cards with secure memory IC with password and authentication, including:
o Atmel®: AT88SC153 and AT88SC1608
Cards with intelligent 1 KB EEPROM with write-protect function, including:
o Infineon®: SLE4418, SLE4428, SLE5518 and SLE5528
Cards with intelligent 256 bytes EEPROM with write-protect function, including:
o Infineon®: SLE4432, SLE4442, SLE5532 and SLE5542
Cards with ‘104’ type EEPROM non-reloadable token counter cards, including:
o Infineon®: SLE4406, SLE4436, SLE5536 and SLE6636
Cards with Intelligent 416-bit EEPROM with internal PIN check, including:
o Infineon®: SLE4404
Cards with Security Logic with Application Zone(s), including:
o Atmel®: AT88SC101, AT88SC102 and AT88SC1003

Manual

View the manual for the ACS ACR38U-N1 here, for free. This manual comes under the category payment terminals and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the ACS ACR38U-N1 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the ACS and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

ACS ACR38U-N1 specifications

Below you will find the product specifications and the manual specifications of the ACS ACR38U-N1.

General
BrandACS
ModelACR38U-N1 | ACR38U-N1
Productpayment terminal
EAN0190268123662, 0660335876888, 0706551121699, 0707430110490, 0760079617874, 0796389775966, 0798033553890, 4894560168012, 5712505801550, 9010640758576, 6889284468034, 6889284120178
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width20 mm
Height58 mm
Depth13.7 mm
Weight12 g
Design
Product colorBlack
Placement supportedIndoor
LED indicatorsYes
Operational conditions
Operating temperature (T-T)0 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Sustainability
Sustainability certificatesRoHS
Ports & interfaces
InterfaceUSB 2.0
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ACS ACR38U-N1 below.

What is the weight of the ACS ACR38U-N1?

The ACS ACR38U-N1 has a weight of 12 g.

What is the height of the ACS ACR38U-N1?

The ACS ACR38U-N1 has a height of 58 mm.

What is the width of the ACS ACR38U-N1?

The ACS ACR38U-N1 has a width of 20 mm.

What is the depth of the ACS ACR38U-N1?

The ACS ACR38U-N1 has a depth of 13.7 mm.

Is the manual of the ACS ACR38U-N1 available in English?

Yes, the manual of the ACS ACR38U-N1 is available in English .

Is your question not listed? Ask your question here

No results