ACE Ecco250 manual

ACE Ecco250
(1)
  • Number of pages: 1
  • Filetype: PDF

REMOVE HDD BRACKET

ASSEMBLE POWER SUPPLY

ASSEMBLE ODD (OPTICAL DRIVE)

ASSEMBLE HDD

1. Remove bottom screw
2. Remove top thumb screws
3. Slide secure lock to the right
4. Lift
1. Remove screws 2. Remove screws
3. Remove case bracket
4. Remove screw
5. Remove PSU support bracket
6. Gently press the power supply into
place (the fan should be facing down)
7. Secure with screws
8. Put case bracket back into place
9. Secure with screws
10. Put PSU support bracket into place and secure with screws
11. Secure case bracket with screws
1. Remove front panel by puting your
and pull gently
2. Gently bend clips to remove 5,25”
cover where you want to place the ODD
3. Slide secure lock to the right and lift
4. Slide in ODD
5. Slide lock to the left to lock in place
(Optional: remove secure lock and screw ODD into place)
6. Put front panel back into place
A
B
A. For 3,5” HDD (Two per bracket)
B. For 2,5” HDD (Three per bracket)
On HDD bracket:
1. Screw your HDD into place
2. Assamble bracket back into case
In external 3,5”:
1. Screw your HDD into place
(both sides if needed)
Bottom of case:
1. Screw your HDD into place
Tip:
Use bracket holder while
working in the case.
INSTALLATION MANUAL
9
8
10
11
ACE Ecco250

Need help?

Number of questions: 0

Do you have a question about the ACE Ecco250 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other ACE Ecco250 owners to properly answer your question.

View the manual for the ACE Ecco250 here, for free. This manual comes under the category Computer cases and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the ACE Ecco250 or do you need help? Ask your question here

ACE Ecco250 specifications

General
Brand ACE
Model Ecco250
Product Computer case
EAN 7340037916220
Language English
Filetype PDF
Design
Form factor Mini Tower
Type PC
Supported motherboard form factors micro ATX
Product colour Black
Other features
External drive bays 2x 5.25", 1x 3.5"
Internal drive bays 5x 3.5"/6x 2.5"
Remote control included
Display
Expansion slots 5
Ports & interfaces
Audio input
Audio output
USB 2.0 ports quantity 2
eSATA ports quantity 0
Weight & dimensions
Width 187 mm
Depth 395 mm
Height 367 mm
Cooling
Number of front fans supported (max) 2
Front fans diameters supported 120 mm
Rear fans installed 1x 120 mm
Number of rear fans supported (max) 1
Rear fans diameters supported 120 mm
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the ACE Ecco250.

Is your question not listed? Ask your question here