3M MP8770 manual

3M MP8770
8.9 · 1
PDF manual
 · 28 pages
English
manual3M MP8770
3M
Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000

ENGLISH

14

4.2 Plug & Play Function

This projector is VESA DDC 1/2B compatible. Plug & Play is possible by connecting to a computer that is VESA DDC
(Display Data Channel) compatible. Plug & Play is a system configured with peripheral equipment including a computer
and display, and a compatible operating system.
Note
Use the RGB cable included with this projector when using Plug & Play. With other cables, pins (12) - (15) are
sometimes not connected (effective only for RGB1).

4.3 Freeze Function

The Freeze function is used to display (freeze) a single frame of the image being projected.
Note
The FREEZE function will turn off during the operation of the MENU, FOCUS, PinP, VOLUME, MUTE, BLANK,
TIMER, AUTO or POSITION functions.

4.4 Magnify Function

The Magnify function is used to enlarge a portion of the display image. Press the MAGNIFY (+) button to magnify the
center of the displayed image. Press again to magnify to 4x. Press the MAGNIFY (-) button to reduce image size. Press
OFF to return to normal image size. To move the display area being magnified, press the POSITION button, then use the
DISC PAD to move the magnified area up, down, left or right.
Note
To return to normal display, press the MAGNIFY OFF button. The MAGNIFY function will turn off during the
operation of the KEYSTONE or AUTO functions.

4.5 Picture-in-Picture

The PinP button on the remote control is used to display a video signal image in the RGB signal image. Press the PinP
button to display the PinP screen (small size). Press again to increase the screen size (maximum size screen). Press a third
time to exit the function and remove the PinP screen.
[small screen size maximum screen size OFF]
Both RGB and Video signals must be present for the Picture-in-Picture function to operate.
1. Select RGB1 or RGB2 input.
2. Start the video input source.
3. Press the PinP button on the remote control to display a small PinP screen in the corner of the projector
image. Press the PinP button again to enlarge the size of the screen display to maximum.
4. Press the POSITION button on the remote control to change the location of the PinP screen. The
position of the Picture-in-Picture screen can also be changed from the Image menu.
5. Press the PinP button a third time to exit the function and remove the PinP screen from the projector
image.

Manual

View the manual for the 3M MP8770 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the 3M MP8770 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the 3M and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

3M MP8770 specifications

Below you will find the product specifications and the manual specifications of the 3M MP8770.

General
Brand3M
ModelMP8770
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the 3M MP8770 below.

Is the manual of the 3M MP8770 available in English?

Yes, the manual of the 3M MP8770 is available in English .

Is your question not listed? Ask your question here

No results