3M MP8660 manual

3M MP8660
8.2 · 1
PDF manual
 · 38 pages
English
manual3M MP8660

TECHNICAL

A–4
t 3M 1997
3M
Multimedia Projector MP8660

A–6. Computer (RGB) Signal Connection Modes

The MP8660 projector automatically recognizes the following connection modes.

Scan Frequency
Dot Clock
Synchronization Signal
Mode
H-Size Pixel
Number
Horizontal
(kHz)
Vertical
(Hz)
Dot
Clock
Frequency
(MHz)
Horizontal
width/polarity
Vertical
width/polarity
Computer
2 848 640 x 400 24.83 56.42 21.053 64/– 8/– TEXT 56
3 800 640 x 400 31.47 70.09 25.175 96/– 2/+ TEXT 70
3 800 640 x 350 31.47 70.09 25.175 96/+ 2/– TEXT 70
4 832 640 x 400 37.86 85.08 31.500 32/– 3/+ TEXT 85
4 832 640 x 350 37.86 85.08 31.500 32/+ 3/– TEXT 85
5 800 640 x 480 31.47 59.94 25.175 96/– 2/– VGA 60
6 832 640 x 480 37.86 72.81 31.500 40/– 3/– VGA 72
7 840 640 x 480 37.50 75.00 31.500 64/– 3/– VGA 75
8 832 640 x 480 43.269 85.01 36.000 56/– 3/– VGA 85
9 896 640 x 480 34.98 66.62 31.334 64/– 3/–
MAC 13
A 1024 800 x 600 35.16 56.25 36.000
72/ 2/
SVGA 56
B 1056 800 x 600 37.88 60.32 40.000 128/+ 4/+ SVGA 60
C 1040 800 x 600 48.08 72.19 50.000 120/+ 6/+ SVGA 72
D 1056 800 x 600 46.88 75.00 49.500 80/+ 3/+ SVGA 75
E 1048 800 x 600 53.67 85.06 56.250 64/– 3/– SVGA 85
F 1152 832 x 624 49.73 74.55 57.283 64/– 3/–
MAC 16
10 1344 1024 x 768 48.365 60.006 65.000 136/– 6/– XGA60
11 1328 1024 x 768 56.476 70.069 75.000 136/– 6/– XGA 70
12 1328 1024 x 768 58.13 71.59 77.200 136/– 3/– XGA 72
13 1312 1024 x 768 60.02 75.029 78.750 96/+ 3/+ XGA 75
14 1312 1024 x 768 48.78 60.00 64.000 96/– 6/–
MAC 19A
15 1328 1024 x 768 60.24 74.93 80.000 96/– 3/–
MAC 19B

Notes:

1. “Mode” denotes the computer mode determined

by the projector. The number can be read by the

read command through RS-232 interface.

2. Advanced scaling is used for all inputs that are

not 800 x 600.

3. Mode 10 and 140: For XGA, full advanced

scaling (vertical and horizontal) is used.

Modes 11–13 and 14: Only vertical advanced

scaling is used.

4. The synchronization signal widths represent the

number of dots (horizontal) and the number of

lines (vertical).

5. H-size denotes the standard number of dots in

the horizontal period.

6. For the MAC16 and MAC19A/B computers, you

must manually set the MAC MODE to “ON” to

determine the correct modes.

Set the MAC MODE to “OFF” for the following

computer modes:

D MAC16 as SVGA75
D MAC19A as XGA60
D MAC19B as XGA75

See Setup Sub–Menu to set MAC MODE.

7. Computer name (in right column) appears when

you display the TEST SCREEN on the projector.

Manual

View the manual for the 3M MP8660 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the 3M MP8660 or do you need help? Ask your question here

Need help?

Do you have a question about the 3M and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

3M MP8660 specifications

Below you will find the product specifications and the manual specifications of the 3M MP8660.

General
Brand3M
ModelMP8660
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the 3M MP8660 below.

Is the manual of the 3M MP8660 available in English?

Yes, the manual of the 3M MP8660 is available in English .

Is your question not listed? Ask your question here

No results