Press the MENU button to display the Main Menu. The SETUP Sub–Menu will be highlighted. Press the
up/down arrow or move the mini–joy stick up/down to select the IMAGE Sub–Menu. Press the right arrow on
the control panel or move the mini–joy stick right to enter the sub–menu.
MESSAGE
MIRROR
NORMAL
H
INVERT
V INVERT
H&V INVERT
SETUPMIRROR
IMAGEMESSAGE
OPTION
Figure 4-6. Image Menu
Press the up/down arrows or move the mini–joy stick up/down to select the desired adjustment screen
(MIRROR or MESSAGE). Press the SELECT button to enter the adjustment screen.
Note
In Figure 4-6, the IMAGE Sub–Menu then the
MIRROR Adjustment Screen have been selected.
Press SELECT to enter the MIRROR Adjustment
Screen.
Use the up/down/left/right arrows or mini–joy stick to change the value. The new value will activate as soon
as it is changed. Press the SELECT button to return to the IMAGE Sub–Menu.
Refer to the IMAGE Sub–Menu chart below. A description and the default for each value is listed.
If you press the RESET button, the selected value will return to the factory default setting.
IMAGE SUB–MENU
Adjustment ScreenValueDescriptionDefault
MIRRORNORMALStandard tabletop projection (no inversion)ON
(see note above)H INVERTRear projection applicationOFF
V INVERTCeiling mount and rear projection applicationOFF
H & V INVERT
Ceiling mount application
OFF
MESSAGEON
OFF
ON = messages display
OFF = no messages display
ON
Manual
View the manual for the 3M MP8660 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the 3M MP8660 or do you need help? Ask your question here
Need help?
Do you have a question about the 3M and is the answer not in the manual?
Question and answer
Number of questions: 0