3M MP8660 manual

3M MP8660
8.2 · 1
PDF manual
 · 38 pages
English
manual3M MP8660
ENGLISH
10
E 3M 1997
3M
Multimedia Projector MP8660

Adjusting the Projector Elevation

The elevation can be adjusted by turning the foot adjuster (Figure 3-16) to raise or lower the angle of the

projector.

Figure 3-16. Foot Adjusters

Note

Both adjusting feet must be raised or lowered the
same amount to project a level image on the
viewing screen. The elevation can be adjusted
from approximately 0.4 to 7.2 degrees.

Rear Projection

A semi-transparent screen (Figure 3-17) can be used to project an image and view it from the backside of the

viewing screen. For this type of installation, the image must be horizontally inverted.

Viewing
Side
The projected light beam has
an of
f-center ratio of 80%
above and 20% below the
center of the lens.
90

Figure 3-17. Rear Projection Viewing

3-3. Now What?

Your MP8660 is now connected and ready to power on. Turn to Section 4 for details on operating the

projector.

Manual

View the manual for the 3M MP8660 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the 3M MP8660 or do you need help? Ask your question here

Need help?

Do you have a question about the 3M and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

3M MP8660 specifications

Below you will find the product specifications and the manual specifications of the 3M MP8660.

General
Brand3M
ModelMP8660
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the 3M MP8660 below.

Is the manual of the 3M MP8660 available in English?

Yes, the manual of the 3M MP8660 is available in English .

Is your question not listed? Ask your question here

No results